Re: [RFC PATCH v2 16/22] sound: usb: Introduce QC USB SND offloading support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

On 1/28/2023 5:32 AM, Greg KH wrote:
On Wed, Jan 25, 2023 at 07:14:18PM -0800, Wesley Cheng wrote:
Several Qualcomm SoCs have a dedicated audio DSP, which has the ability to
support USB sound devices.  This vendor driver will implement the required
handshaking with the DSP, in order to pass along required resources that
will be utilized by the DSP's USB SW.  The communication channel used for
this handshaking will be using the QMI protocol.  Required resources
include:
- Allocated secondary event ring address
- EP transfer ring address
- Interrupter number

The above information will allow for the audio DSP to execute USB transfers
over the USB bus.  It will also be able to support devices that have an
implicit feedback and sync endpoint as well.  Offloading these data
transfers will allow the main/applications processor to enter lower CPU
power modes, and sustain a longer duration in those modes.

Audio offloading is initiated with the following sequence:
1. Userspace configures to route audio playback to USB backend and starts
playback on the platform soundcard.
2. The Q6DSP AFE will communicate to the audio DSP to start the USB AFE
port.
3. This results in a QMI packet with a STREAM enable command.
4. The QC audio offload driver will fetch the required resources, and pass
this information as part of the QMI response to the STREAM enable command.
5. Once the QMI response is received the audio DSP will start queuing data
on the USB bus.

A real driver, finally!!!  Thank you for posting this.

That being said, some comments:

--- /dev/null
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -0,0 +1,1775 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.

It's 2023 :)

+ */
+
+#include <linux/ctype.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/init.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/xhci-intr.h>
+#include <linux/usb/quirks.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
+#include <linux/soc/qcom/qmi.h>
+#include <linux/iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
+#include <sound/q6usboffload.h>
+
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+
+#include <sound/soc.h>
+#include <sound/soc-usb.h>
+#include "../usbaudio.h"
+#include "../card.h"
+#include "../midi.h"
+#include "../mixer.h"
+#include "../proc.h"
+#include "../quirks.h"
+#include "../endpoint.h"
+#include "../helper.h"
+#include "../pcm.h"
+#include "../format.h"
+#include "../power.h"
+#include "../stream.h"
+#include "../media.h"
+#include "usb_audio_qmi_v01.h"
+
+/* Stream disable request timeout during USB device disconnect */
+#define DEV_RELEASE_WAIT_TIMEOUT 10000 /* in ms */
+
+/* Data interval calculation parameters */
+#define BUS_INTERVAL_FULL_SPEED 1000 /* in us */
+#define BUS_INTERVAL_HIGHSPEED_AND_ABOVE 125 /* in us */
+#define MAX_BINTERVAL_ISOC_EP 16
+
+#define SND_PCM_CARD_NUM_MASK 0xffff0000
+#define SND_PCM_DEV_NUM_MASK 0xff00
+#define SND_PCM_STREAM_DIRECTION 0xff
+
+/* iommu resource parameters and management */
+#define PREPEND_SID_TO_IOVA(iova, sid) ((u64)(((u64)(iova)) | \
+					(((u64)sid) << 32)))
+#define IOVA_BASE 0x1000
+#define IOVA_XFER_RING_BASE (IOVA_BASE + PAGE_SIZE * (SNDRV_CARDS + 1))
+#define IOVA_XFER_BUF_BASE (IOVA_XFER_RING_BASE + PAGE_SIZE * SNDRV_CARDS * 32)
+#define IOVA_XFER_RING_MAX (IOVA_XFER_BUF_BASE - PAGE_SIZE)
+#define IOVA_XFER_BUF_MAX (0xfffff000 - PAGE_SIZE)
+
+#define MAX_XFER_BUFF_LEN (24 * PAGE_SIZE)
+
+struct iova_info {
+	struct list_head list;
+	unsigned long start_iova;
+	size_t size;
+	bool in_use;
+};
+
+struct intf_info {
+	unsigned long data_xfer_ring_va;
+	size_t data_xfer_ring_size;
+	unsigned long sync_xfer_ring_va;
+	size_t sync_xfer_ring_size;
+	unsigned long xfer_buf_va;
+	size_t xfer_buf_size;
+	phys_addr_t xfer_buf_pa;
+	unsigned int data_ep_pipe;
+	unsigned int sync_ep_pipe;
+	u8 *xfer_buf;
+	u8 intf_num;
+	u8 pcm_card_num;
+	u8 pcm_dev_num;
+	u8 direction;
+	bool in_use;
+};
+
+struct uaudio_qmi_dev {
+	struct device *dev;
+	u32 sid;
+	u32 intr_num;
+	struct xhci_interrupter *ir;
+	struct xhci_ring *sec_ring;
+	struct iommu_domain *domain;
+
+	/* list to keep track of available iova */
+	struct list_head xfer_ring_list;
+	size_t xfer_ring_iova_size;
+	unsigned long curr_xfer_ring_iova;
+	struct list_head xfer_buf_list;
+	size_t xfer_buf_iova_size;
+	unsigned long curr_xfer_buf_iova;
+
+	/* bit fields representing pcm card enabled */
+	unsigned long card_slot;
+	/* indicate event ring mapped or not */
+	bool er_mapped;
+	/* reference count to number of possible consumers */
+	atomic_t qdev_in_use;
+	/* idx to last udev card number plugged in */
+	unsigned int last_card_num;
+};
+
+struct uaudio_dev {
+	struct usb_device *udev;
+	/* audio control interface */
+	struct usb_host_interface *ctrl_intf;
+	unsigned int card_num;
+	unsigned int usb_core_id;
+	atomic_t in_use;

Why is this atomic?  What happens if it changes right after you read it?


We did add some locking after Takashi mentioned that some of the operations run asynchrnous to one another. I will double check to make sure those locks are in the proper places.

+	struct kref kref;

Why is this structure not a "real" device?  Why are you faking it out?
It should be in the device tree as you have a reference count and a
lifespan, don't make it harder by trying to roll your own logic here.



This technically is a wrapper around the "struct snd_usb_audio" device that is allocated by the main USB SND class driver (which is a udev). It will exist as long as the USB device is present.

The reason for using a kref here is so that we can easily signal our cleanup code once all streams are stopped. It could be that several streams are opened, and the handling for opening/closing those streams are utilizing the same QMI handler.

When using kref, we can just specifiy the callback that is executed when the QMI stream disable request is handled for the last stream.

+	wait_queue_head_t disconnect_wq;
+
+	/* interface specific */
+	int num_intf;
+	struct intf_info *info;
+	struct snd_usb_audio *chip;
+};
+
+static struct uaudio_dev uadev[SNDRV_CARDS];
+static struct uaudio_qmi_dev *uaudio_qdev;
+static struct uaudio_qmi_svc *uaudio_svc;

Why are these all limited?  These should all be dynamic and tied to the
device that the driver is bound to.  No static limits here please.


So here is a summary of what these are used for:
uadev - this is limited to the same number of devices supported by USB SND, so there isn't a reason to support more than what USB SND is able to support.

uaudio_qdev - the offload device structure. It carries information about the offload parameters, which are used when we initiate a stream enable. The QC platform only supports one offload device, hence why it is limited. (audio DSP only has support for one)

uaudio_svc - this is the QMI client handle that is registered to our QMI interface. There should only be one client, which will handle all QMI commands with the QMI CMD ID specified.

Since this is a platform specific driver, I believe we should be able to restrict/limit the number of devices based on what the HW can support. With regards to a generic layer, such as soc-usb, I agree that that driver shouldn't be limited/restricted, since other platforms may utilize that driver, and expand the number of devices.

+static DEFINE_MUTEX(qdev_mutex);

What does this lock?



This protects the offload device structure, as we can be cleaning it up (during disconnect) while potentially trying to start a stream req. (the stream request API will use this to check for the card number to use)

+
+struct uaudio_qmi_svc {
+	struct qmi_handle *uaudio_svc_hdl;
+	struct work_struct qmi_disconnect_work;
+	struct workqueue_struct *uaudio_wq;
+	struct sockaddr_qrtr client_sq;
+	bool client_connected;
+};
+
+enum mem_type {
+	MEM_EVENT_RING,
+	MEM_XFER_RING,
+	MEM_XFER_BUF,
+};
+
+/* Supported audio formats */
+enum usb_qmi_audio_format {
+	USB_QMI_PCM_FORMAT_S8 = 0,
+	USB_QMI_PCM_FORMAT_U8,
+	USB_QMI_PCM_FORMAT_S16_LE,
+	USB_QMI_PCM_FORMAT_S16_BE,
+	USB_QMI_PCM_FORMAT_U16_LE,
+	USB_QMI_PCM_FORMAT_U16_BE,
+	USB_QMI_PCM_FORMAT_S24_LE,
+	USB_QMI_PCM_FORMAT_S24_BE,
+	USB_QMI_PCM_FORMAT_U24_LE,
+	USB_QMI_PCM_FORMAT_U24_BE,
+	USB_QMI_PCM_FORMAT_S24_3LE,
+	USB_QMI_PCM_FORMAT_S24_3BE,
+	USB_QMI_PCM_FORMAT_U24_3LE,
+	USB_QMI_PCM_FORMAT_U24_3BE,
+	USB_QMI_PCM_FORMAT_S32_LE,
+	USB_QMI_PCM_FORMAT_S32_BE,
+	USB_QMI_PCM_FORMAT_U32_LE,
+	USB_QMI_PCM_FORMAT_U32_BE,
+};
+
+static void uaudio_iommu_unmap(enum mem_type mtype, unsigned long va,
+	size_t iova_size, size_t mapped_iova_size);
+static void uaudio_dev_cleanup(struct uaudio_dev *dev);
+static void disable_audio_stream(struct snd_usb_substream *subs);
+static struct snd_usb_substream *find_substream(unsigned int card_num,
+	unsigned int pcm_idx, unsigned int direction);

Why not reorder the code to not need predeclarations?



Will look into that.

+
+/* QMI service disconnect handlers */
+static void qmi_disconnect_work(struct work_struct *w)
+{
+	struct intf_info *info;
+	int idx, if_idx;
+	struct snd_usb_substream *subs;
+	struct snd_usb_audio *chip;
+
+	/* find all active intf for set alt 0 and cleanup usb audio dev */
+	for (idx = 0; idx < SNDRV_CARDS; idx++) {
+		if (!atomic_read(&uadev[idx].in_use))
+			continue;
+
+		chip = uadev[idx].chip;
+		for (if_idx = 0; if_idx < uadev[idx].num_intf; if_idx++) {
+			if (!uadev[idx].info || !uadev[idx].info[if_idx].in_use)
+				continue;
+			info = &uadev[idx].info[if_idx];
+			subs = find_substream(info->pcm_card_num,
+						info->pcm_dev_num,
+						info->direction);
+			if (!subs || !chip || atomic_read(&chip->shutdown)) {
+				dev_err(&subs->dev->dev,
+					"no sub for c#%u dev#%u dir%u\n",
+					info->pcm_card_num,
+					info->pcm_dev_num,
+					info->direction);
+				continue;
+			}
+			disable_audio_stream(subs);
+		}
+		atomic_set(&uadev[idx].in_use, 0);
+		mutex_lock(&chip->mutex);
+		uaudio_dev_cleanup(&uadev[idx]);
+		mutex_unlock(&chip->mutex);
+	}
+}
+
+/**
+ * qmi_bye_cb() - qmi bye message callback
+ * @handle: QMI handle
+ * @node: id of the dying node
+ *
+ * This callback is invoked when the QMI bye control message is received
+ * from the QMI client.  Handle the message accordingly by ensuring that
+ * the USB offload path is disabled and cleaned up.  At this point, ADSP
+ * is not utilizing the USB bus.
+ *
+ */
+static void qmi_bye_cb(struct qmi_handle *handle, unsigned int node)
+{
+	struct uaudio_qmi_svc *svc = uaudio_svc;
+
+	if (svc->uaudio_svc_hdl != handle)
+		return;
+
+	if (svc->client_connected && svc->client_sq.sq_node == node) {
+		queue_work(svc->uaudio_wq, &svc->qmi_disconnect_work);
+		svc->client_sq.sq_node = 0;
+		svc->client_sq.sq_port = 0;
+		svc->client_sq.sq_family = 0;
+		svc->client_connected = false;
+	}
+}
+
+/**
+ * qmi_svc_disconnect_cb() - qmi client disconnected
+ * @handle: QMI handle
+ * @node: id of the dying node
+ * @port: port of the dying client
+ *
+ * Invoked when the remote QMI client is disconnected.  Handle this event
+ * the same way as when the QMI bye message is received.  This will ensure
+ * the USB offloading path is disabled and cleaned up.
+ *
+ */
+static void qmi_svc_disconnect_cb(struct qmi_handle *handle,
+				  unsigned int node, unsigned int port)
+{
+	struct uaudio_qmi_svc *svc;
+
+	if (uaudio_svc == NULL)
+		return;
+
+	svc = uaudio_svc;
+	if (svc->uaudio_svc_hdl != handle)
+		return;
+
+	if (svc->client_connected && svc->client_sq.sq_node == node &&
+			svc->client_sq.sq_port == port) {
+		queue_work(svc->uaudio_wq, &svc->qmi_disconnect_work);
+		svc->client_sq.sq_node = 0;
+		svc->client_sq.sq_port = 0;
+		svc->client_sq.sq_family = 0;
+		svc->client_connected = false;
+	}
+}
+
+/* QMI client callback handlers from QMI interface */
+static struct qmi_ops uaudio_svc_ops_options = {
+	.bye = qmi_bye_cb,
+	.del_client = qmi_svc_disconnect_cb,
+};
+
+static enum usb_audio_device_speed_enum_v01
+get_speed_info(enum usb_device_speed udev_speed)
+{
+	switch (udev_speed) {
+	case USB_SPEED_LOW:
+		return USB_AUDIO_DEVICE_SPEED_LOW_V01;
+	case USB_SPEED_FULL:
+		return USB_AUDIO_DEVICE_SPEED_FULL_V01;
+	case USB_SPEED_HIGH:
+		return USB_AUDIO_DEVICE_SPEED_HIGH_V01;
+	case USB_SPEED_SUPER:
+		return USB_AUDIO_DEVICE_SPEED_SUPER_V01;
+	case USB_SPEED_SUPER_PLUS:
+		return USB_AUDIO_DEVICE_SPEED_SUPER_PLUS_V01;
+	default:
+		return USB_AUDIO_DEVICE_SPEED_INVALID_V01;
+	}
+}
+
+/* Offloading IOMMU management */
+static unsigned long uaudio_get_iova(unsigned long *curr_iova,
+	size_t *curr_iova_size, struct list_head *head, size_t size)
+{
+	struct iova_info *info, *new_info = NULL;
+	struct list_head *curr_head;
+	unsigned long va = 0;
+	size_t tmp_size = size;
+	bool found = false;
+
+	if (size % PAGE_SIZE) {
+		dev_err(uaudio_qdev->dev, "size %zu is not page size multiple\n",
+			size);
+		goto done;
+	}
+
+	if (size > *curr_iova_size) {
+		dev_err(uaudio_qdev->dev, "size %zu > curr size %zu\n",
+			size, *curr_iova_size);
+		goto done;
+	}
+	if (*curr_iova_size == 0) {
+		dev_err(uaudio_qdev->dev, "iova mapping is full\n");
+		goto done;
+	}
+
+	list_for_each_entry(info, head, list) {
+		/* exact size iova_info */
+		if (!info->in_use && info->size == size) {
+			info->in_use = true;
+			va = info->start_iova;
+			*curr_iova_size -= size;
+			found = true;
+			dev_dbg(uaudio_qdev->dev, "exact size: %zu found\n", size);
+			goto done;
+		} else if (!info->in_use && tmp_size >= info->size) {
+			if (!new_info)
+				new_info = info;
+			dev_dbg(uaudio_qdev->dev, "partial size: %zu found\n",
+					info->size);
+			tmp_size -= info->size;
+			if (tmp_size)
+				continue;
+
+			va = new_info->start_iova;
+			for (curr_head = &new_info->list; curr_head !=
+			&info->list; curr_head = curr_head->next) {
+				new_info = list_entry(curr_head, struct
+						iova_info, list);
+				new_info->in_use = true;
+			}
+			info->in_use = true;
+			*curr_iova_size -= size;
+			found = true;
+			goto done;
+		} else {
+			/* iova region in use */
+			new_info = NULL;
+			tmp_size = size;
+		}
+	}
+
+	info = kzalloc(sizeof(struct iova_info), GFP_KERNEL);
+	if (!info) {
+		va = 0;
+		goto done;
+	}
+
+	va = info->start_iova = *curr_iova;
+	info->size = size;
+	info->in_use = true;
+	*curr_iova += size;
+	*curr_iova_size -= size;
+	found = true;
+	list_add_tail(&info->list, head);
+
+done:
+	if (!found)
+		dev_err(uaudio_qdev->dev, "unable to find %zu size iova\n",
+			size);
+	else
+		dev_dbg(uaudio_qdev->dev,
+			"va:0x%08lx curr_iova:0x%08lx curr_iova_size:%zu\n",
+			va, *curr_iova, *curr_iova_size);
+
+	return va;
+}
+
+/**
+ * uaudio_iommu_map() - maps iommu memory for adsp
+ * @mtype: ring type
+ * @dma_coherent: dma coherent
+ * @pa: physical address for ring/buffer
+ * @size: size of memory region
+ * @sgt: sg table for memory region
+ *
+ * Maps the XHCI related resources to a memory region that is assigned to be
+ * used by the adsp.  This will be mapped to the domain, which is created by
+ * the ASoC USB backend driver.
+ *
+ */
+static unsigned long uaudio_iommu_map(enum mem_type mtype, bool dma_coherent,
+		phys_addr_t pa, size_t size, struct sg_table *sgt)
+{
+	unsigned long va_sg, va = 0;
+	bool map = true;
+	int i, ret;
+	size_t sg_len, total_len = 0;
+	struct scatterlist *sg;
+	phys_addr_t pa_sg;
+	int prot = IOMMU_READ | IOMMU_WRITE;
+
+	if (dma_coherent)
+		prot |= IOMMU_CACHE;
+
+	switch (mtype) {
+	case MEM_EVENT_RING:
+		va = IOVA_BASE;
+		/* er already mapped */
+		if (uaudio_qdev->er_mapped)
+			map = false;
+		break;
+	case MEM_XFER_RING:
+		va = uaudio_get_iova(&uaudio_qdev->curr_xfer_ring_iova,
+		&uaudio_qdev->xfer_ring_iova_size, &uaudio_qdev->xfer_ring_list,
+		size);
+		break;
+	case MEM_XFER_BUF:
+		va = uaudio_get_iova(&uaudio_qdev->curr_xfer_buf_iova,
+		&uaudio_qdev->xfer_buf_iova_size, &uaudio_qdev->xfer_buf_list,
+		size);
+		break;
+	default:
+		dev_err(uaudio_qdev->dev, "unknown mem type %d\n", mtype);
+	}
+
+	if (!va || !map)
+		goto done;
+
+	if (!sgt)
+		goto skip_sgt_map;
+
+	va_sg = va;
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		sg_len = PAGE_ALIGN(sg->offset + sg->length);
+		pa_sg = page_to_phys(sg_page(sg));
+		ret = iommu_map(uaudio_qdev->domain, va_sg, pa_sg, sg_len,
+								prot);
+		if (ret) {
+			dev_err(uaudio_qdev->dev, "mapping failed ret%d\n", ret);
+			dev_err(uaudio_qdev->dev,
+				"type:%d, pa:%pa iova:0x%08lx sg_len:%zu\n",
+				mtype, &pa_sg, va_sg, sg_len);
+			uaudio_iommu_unmap(MEM_XFER_BUF, va, size, total_len);
+			va = 0;
+			goto done;
+		}
+		dev_dbg(uaudio_qdev->dev,
+			"type:%d map pa:%pa to iova:0x%08lx len:%zu offset:%u\n",
+			mtype, &pa_sg, va_sg, sg_len, sg->offset);
+		va_sg += sg_len;
+		total_len += sg_len;
+	}
+
+	if (size != total_len) {
+		dev_err(uaudio_qdev->dev, "iova size %zu != mapped iova size %zu\n",
+			size, total_len);
+		uaudio_iommu_unmap(MEM_XFER_BUF, va, size, total_len);
+		va = 0;
+	}
+	return va;
+
+skip_sgt_map:
+	dev_dbg(uaudio_qdev->dev, "type:%d map pa:%pa to iova:0x%08lx size:%zu\n",
+		mtype, &pa, va, size);
+
+	ret = iommu_map(uaudio_qdev->domain, va, pa, size, prot);
+	if (ret)
+		dev_err(uaudio_qdev->dev,
+			"failed to map pa:%pa iova:0x%lx type:%d ret:%d\n",
+			&pa, va, mtype, ret);
+done:
+	return va;
+}
+
+static void uaudio_put_iova(unsigned long va, size_t size, struct list_head
+	*head, size_t *curr_iova_size)
+{
+	struct iova_info *info;
+	size_t tmp_size = size;
+	bool found = false;
+
+	list_for_each_entry(info, head, list) {
+		if (info->start_iova == va) {
+			if (!info->in_use) {
+				dev_err(uaudio_qdev->dev, "va %lu is not in use\n",
+					va);
+				return;
+			}
+			found = true;
+			info->in_use = false;
+			if (info->size == size)
+				goto done;
+		}
+
+		if (found && tmp_size >= info->size) {
+			info->in_use = false;
+			tmp_size -= info->size;
+			if (!tmp_size)
+				goto done;
+		}
+	}
+
+	if (!found) {
+		dev_err(uaudio_qdev->dev, "unable to find the va %lu\n", va);
+		return;
+	}
+done:
+	*curr_iova_size += size;
+	dev_dbg(uaudio_qdev->dev, "curr_iova_size %zu\n", *curr_iova_size);
+}
+
+/**
+ * uaudio_iommu_unmap() - unmaps iommu memory for adsp
+ * @mtype: ring type
+ * @va: virtual address to unmap
+ * @iova_size: region size
+ * @mapped_iova_size: mapped region size
+ *
+ * Unmaps the memory region that was previously assigned to the adsp.
+ *
+ */
+static void uaudio_iommu_unmap(enum mem_type mtype, unsigned long va,
+	size_t iova_size, size_t mapped_iova_size)
+{
+	size_t umap_size;
+	bool unmap = true;
+
+	if (!va || !iova_size)
+		return;
+
+	switch (mtype) {
+	case MEM_EVENT_RING:
+		if (uaudio_qdev->er_mapped)
+			uaudio_qdev->er_mapped = false;
+		else
+			unmap = false;
+		break;
+
+	case MEM_XFER_RING:
+		uaudio_put_iova(va, iova_size, &uaudio_qdev->xfer_ring_list,
+		&uaudio_qdev->xfer_ring_iova_size);
+		break;
+	case MEM_XFER_BUF:
+		uaudio_put_iova(va, iova_size, &uaudio_qdev->xfer_buf_list,
+		&uaudio_qdev->xfer_buf_iova_size);
+		break;
+	default:
+		dev_err(uaudio_qdev->dev, "unknown mem type %d\n", mtype);
+		unmap = false;
+	}
+
+	if (!unmap || !mapped_iova_size)
+		return;
+
+	dev_dbg(uaudio_qdev->dev, "type %d: unmap iova 0x%08lx size %zu\n",
+		mtype, va, mapped_iova_size);
+
+	umap_size = iommu_unmap(uaudio_qdev->domain, va, mapped_iova_size);
+	if (umap_size != mapped_iova_size)
+		dev_err(uaudio_qdev->dev,
+			"unmapped size %zu for iova 0x%08lx of mapped size %zu\n",
+			umap_size, va, mapped_iova_size);
+}
+
+/* looks up alias, if any, for controller DT node and returns the index */
+static int usb_get_controller_id(struct usb_device *udev)
+{
+	if (udev->bus->sysdev && udev->bus->sysdev->of_node)
+		return of_alias_get_id(udev->bus->sysdev->of_node, "usb");
+
+	return -ENODEV;
+}
+
+/**
+ * uaudio_dev_intf_cleanup() - cleanup transfer resources
+ * @udev: usb device
+ * @info: usb offloading interface
+ *
+ * Cleans up the transfer ring related resources which are assigned per
+ * endpoint from XHCI.  This is invoked when the USB endpoints are no
+ * longer in use by the adsp.
+ *
+ */
+static void uaudio_dev_intf_cleanup(struct usb_device *udev,
+	struct intf_info *info)
+{
+	uaudio_iommu_unmap(MEM_XFER_RING, info->data_xfer_ring_va,
+		info->data_xfer_ring_size, info->data_xfer_ring_size);
+	info->data_xfer_ring_va = 0;
+	info->data_xfer_ring_size = 0;
+
+	uaudio_iommu_unmap(MEM_XFER_RING, info->sync_xfer_ring_va,
+		info->sync_xfer_ring_size, info->sync_xfer_ring_size);
+	info->sync_xfer_ring_va = 0;
+	info->sync_xfer_ring_size = 0;
+
+	uaudio_iommu_unmap(MEM_XFER_BUF, info->xfer_buf_va,
+		info->xfer_buf_size, info->xfer_buf_size);
+	info->xfer_buf_va = 0;
+
+	usb_free_coherent(udev, info->xfer_buf_size,
+		info->xfer_buf, info->xfer_buf_pa);
+	info->xfer_buf_size = 0;
+	info->xfer_buf = NULL;
+	info->xfer_buf_pa = 0;
+
+	info->in_use = false;
+}
+
+/**
+ * uaudio_event_ring_cleanup_free() - cleanup secondary event ring
+ * @dev: usb offload device
+ *
+ * Cleans up the secondary event ring that was requested.  This will
+ * occur when the adsp is no longer transferring data on the USB bus
+ * across all endpoints.
+ *
+ */
+static void uaudio_event_ring_cleanup_free(struct uaudio_dev *dev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->udev->bus);
+
+	clear_bit(dev->card_num, &uaudio_qdev->card_slot);
+	/* all audio devices are disconnected */
+	if (!uaudio_qdev->card_slot) {
+		uaudio_iommu_unmap(MEM_EVENT_RING, IOVA_BASE, PAGE_SIZE,
+			PAGE_SIZE);
+		xhci_remove_secondary_interrupter(hcd, uaudio_qdev->ir);
+		uaudio_qdev->ir = NULL;
+	}
+}
+
+/* kref release callback when all streams are disabled */
+static void uaudio_dev_release(struct kref *kref)
+{
+	struct uaudio_dev *dev = container_of(kref, struct uaudio_dev, kref);
+
+	uaudio_event_ring_cleanup_free(dev);
+	atomic_set(&dev->in_use, 0);
+	wake_up(&dev->disconnect_wq);
+}
+
+static struct snd_usb_substream *find_substream(unsigned int card_num,
+	unsigned int pcm_idx, unsigned int direction)
+{
+	struct snd_usb_stream *as;
+	struct snd_usb_substream *subs = NULL;
+	struct snd_usb_audio *chip;
+
+	chip = uadev[card_num].chip;
+	if (!chip || atomic_read(&chip->shutdown))
+		goto done;

What happens if this atomic value changes right after you read it?

See, don't use them, use a proper lock correctly, it's much simpler and
will actually work.

We did add some locking compared to the previous revision. Again, will check to make sure they are all in the proper places.

Thanks
Wesley Cheng



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux