On 07/02/2023 17:34, Lucas Tanure wrote: > On 07-02-2023 16:13, Krzysztof Kozlowski wrote: >> On 07/02/2023 16:46, Lucas Tanure wrote: >>>>> + Shared boost allows two amplifiers to share a single boost circuit by >>>>> + communicating on the MDSYNC bus. The passive amplifier does not control >>>>> + the boost and receives data from the active amplifier. GPIO1 should be >>>>> + configured for Sync when shared boost is used. Shared boost is not >>>>> + compatible with External boost. Active amplifier requires >>>>> + boost-peak-milliamp, boost-ind-nanohenry and boost-cap-microfarad. >>>>> 0 = Internal Boost >>>>> 1 = External Boost >>>>> + 2 = Reserved >>>> >>>> How binding can be reserved? For what and why? Drop. 2 is shared active, >>>> 3 is shared passive. >>> 2 Is shared boost without VSPK switch, a mode not supported for new >>> system designs. But there is laptops using it, so we need to keep >>> supporting in the driver. >> >> That's not the answer. 2 is nothing here, so it cannot be reserved. >> Aren't you mixing now some register value with bindings? >> >> Best regards, >> Krzysztof >> >> > I have added a new patch with propper documentation. > And I would like to use 3 and 4 for shared boost as > CS35L41_EXT_BOOST_NO_VSPK_SWITCH already exist as 2 and is used in the > current driver. I don't see CS35L41_EXT_BOOST_NO_VSPK_SWITCH in the bindings. > The laptop that uses CS35L41_EXT_BOOST_NO_VSPK_SWITCH doesn't have the > property "cirrus,boost-type", but to make everything consistent I would > prefer to use 3 and 4 for the new boost types. > Is that ok with you? I don't see how it is related. The value does not exist, so whether laptop has that property or not, is not really related, right? Best regards, Krzysztof _______________________________________________ Alsa-devel mailing list -- alsa-devel@xxxxxxxxxxxxxxxx To unsubscribe send an email to alsa-devel-leave@xxxxxxxxxxxxxxxx
