Seems like properties parsing and reading was copy-pasted,
so "everest,interrupt-src" and "everest,interrupt-clk" are saved into
the es8326->jack_pol variable. This might lead to wrong settings
being saved into the reg 57 (ES8326_HP_DET).
Fix this by using proper variables while reading properties.
Signed-off-by: Alexey Firago <a.firago@xxxxxxxxx>
---
sound/soc/codecs/es8326.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 9ddf6a35e91c..28a0565c2a95 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -729,14 +729,16 @@ static int es8326_probe(struct snd_soc_component *component)
}
dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);
- ret = device_property_read_u8(component->dev, "everest,interrupt-src", &es8326->jack_pol);
+ ret = device_property_read_u8(component->dev, "everest,interrupt-src",
+ &es8326->interrupt_src);
if (ret != 0) {
dev_dbg(component->dev, "interrupt-src return %d", ret);
es8326->interrupt_src = ES8326_HP_DET_SRC_PIN9;
}
dev_dbg(component->dev, "interrupt-src %x", es8326->interrupt_src);
- ret = device_property_read_u8(component->dev, "everest,interrupt-clk", &es8326->jack_pol);
+ ret = device_property_read_u8(component->dev, "everest,interrupt-clk",
+ &es8326->interrupt_clk);
if (ret != 0) {
dev_dbg(component->dev, "interrupt-clk return %d", ret);
es8326->interrupt_clk = 0x45;
--
2.34.1
