From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> idle_bias_on was set because cs42l42 has a "VMID" type pseudo-midrail supply (named FILT+), and these typically take a long time to charge. But the driver never enabled pm_runtime so it would never have powered- down the cs42l42 anyway. In fact, FILT+ can charge to operating voltage within 12.5 milliseconds of enabling HP or ADC. This time is already covered by the startup delay of the HP/ADC. The datasheet warning about FILT+ taking up to 1 second to charge only applies in the special cases that either the PLL is started or DETECT_MODE set to non-zero while both HP and ADC are off. The driver never does either of these. Removing idle_bias_on allows the Soundwire host controller to suspend if there isn't a snd_soc_jack handler registered. Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/cs42l42.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index aa8d724432ab8..e3edaa1a2761e 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -597,7 +597,6 @@ const struct snd_soc_component_driver cs42l42_soc_component = { .num_dapm_routes = ARRAY_SIZE(cs42l42_audio_map), .controls = cs42l42_snd_controls, .num_controls = ARRAY_SIZE(cs42l42_snd_controls), - .idle_bias_on = 1, .endianness = 1, }; EXPORT_SYMBOL_NS_GPL(cs42l42_soc_component, SND_SOC_CS42L42_CORE); -- 2.34.1