On Tue, 2008-07-01 at 12:09 +0200, Takashi Iwai wrote: > Do you mean that after sending the last two SYSEX, the device returns > the SYSEX messages above appropriately? In which timing? Those two SysEx messages are the (immediate) response to the initialisation string. The first seems some generic "yes, bay attached, speaking protocol 2.3" reply, while the second is your initial jack status. You could time out on not receiving the "bay attached" message and then not enable your SysEx listener at all. The actual message will arrive within a single second, but 5 seconds should be a safe bet. Once this sequence completes, you will then get jack/button/volume updates as the event occurs on the bay. To confirm, the initialisation string is: echo -en "\xf0\x00\x20\x21\x61\x00\x00\x00\x7f\x00\xf7" > /dev/snd/midiC0D1 > thanks, > Takashi Regards, Tony V.
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
