On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Update VA, RX and TX macro and lpass_tlmm clock properties and
> enable them.
Everything is an update and this does not explain what exactly you are
updating in the nodes and why.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 81e0f3a..674b01a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -8,8 +8,67 @@
>
> #include <dt-bindings/sound/qcom,q6afe.h>
>
> +/delete-node/ &lpass_rx_macro;
Why?
> +/delete-node/ &lpass_tx_macro;
> +/delete-node/ &lpass_va_macro;
> +
> /{
> /* BOARD-SPECIFIC TOP LEVEL NODES */
> + lpass_rx_macro: codec@3200000 {
> + compatible = "qcom,sc7280-lpass-rx-macro";
> + reg = <0 0x03200000 0 0x1000>;
Why? They are the same.
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
Still the same...
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&lpass_va_macro>;
> +
> + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
This is different...
> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
But this not.
Best regards,
Krzysztof
