From: Ondrej Jirman <megi@xxxxxx>
rt5640_set_dai_sysclk is called with freq == 0 when playback stops. This
causes DMIC setup code to fail. I2S interface doesn't need to be active
for codec to work, so don't clear rt5640->sysclk after
rt5640_set_dai_sysclk is called with freq == 0.
Signed-off-by: Ondrej Jirman <megi@xxxxxx>
Signed-off-by: Jarrah Gosbell <kernel@undef.tools>
---
sound/soc/codecs/rt5640.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 18e01949f20e..054de41ceccb 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -1839,6 +1839,9 @@ static int rt5640_set_dai_sysclk(struct snd_soc_dai *dai,
unsigned int reg_val = 0;
unsigned int pll_bit = 0;
+ if (freq == 0)
+ return 0;
+
switch (clk_id) {
case RT5640_SCLK_S_MCLK:
reg_val |= RT5640_SCLK_SRC_MCLK;
--
2.39.0
