Re: [PATCH 02/19] soundwire: amd: Add support for AMD Master driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/11/2023 10:02 AM, Vijendar Mukunda wrote:
AMD ACP IP block has two soundwire controller devices.
Add support for
- Master driver probe & remove sequence
- Helper functions to enable/disable interrupts, Initialize sdw controller,
   enable sdw pads
- Master driver sdw_master_ops & port_ops callbacks

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@xxxxxxx>
---

...

+
+static int amd_sdwc_compute_params(struct sdw_bus *bus)
+{
+	struct sdw_transport_data t_data = {0};
+	struct sdw_master_runtime *m_rt;
+	struct sdw_port_runtime *p_rt;
+	struct sdw_bus_params *b_params = &bus->params;
+	int port_bo, hstart, hstop, sample_int;
+	unsigned int rate, bps;
+
+	port_bo  = 0;

Double space before '='.

+	hstart = 1;
+	hstop = bus->params.col - 1;
+	t_data.hstop = hstop;
+	t_data.hstart = hstart;
+
+	list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) {
+		rate = m_rt->stream->params.rate;
+		bps = m_rt->stream->params.bps;
+		sample_int = (bus->params.curr_dr_freq / rate);
+		list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
+			port_bo = (p_rt->num * 64) + 1;
+			dev_dbg(bus->dev, "p_rt->num=%d hstart=%d hstop=%d port_bo=%d\n",
+				p_rt->num, hstart, hstop, port_bo);
+			sdw_fill_xport_params(&p_rt->transport_params, p_rt->num,
+					      false, SDW_BLK_GRP_CNT_1, sample_int,
+					      port_bo, port_bo >> 8, hstart, hstop,
+					      SDW_BLK_PKG_PER_PORT, 0x0);
+
+			sdw_fill_port_params(&p_rt->port_params,
+					     p_rt->num, bps,
+					     SDW_PORT_FLOW_MODE_ISOCH,
+					     b_params->m_data_mode);
+			t_data.hstart = hstart;
+			t_data.hstop = hstop;
+			t_data.block_offset = port_bo;
+			t_data.sub_block_offset = 0;
+		}
+		amd_sdwc_compute_slave_ports(m_rt, &t_data);
+	}
+	return 0;
+}
+

...

+
+static int amd_sdwc_port_enable(struct sdw_bus *bus,
+				struct sdw_enable_ch *enable_ch,
+				unsigned int bank)
+{
+	struct amd_sdwc_ctrl *ctrl = to_amd_sdw(bus);
+	u32 dpn_ch_enable;
+	u32 ch_enable_reg, channel_type;
+
+	switch (ctrl->instance) {
+	case ACP_SDW0:
+		channel_type = enable_ch->port_num;
+		break;
+	case ACP_SDW1:
+		channel_type = enable_ch->port_num + ACP_SDW0_MAX_DAI;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (channel_type) {
+	case ACP_SDW0_AUDIO_TX:
+		ch_enable_reg = ACP_SW_AUDIO_TX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW0_HS_TX:
+		ch_enable_reg = ACP_SW_HEADSET_TX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW0_BT_TX:
+		ch_enable_reg = ACP_SW_BT_TX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW1_BT_TX:
+		ch_enable_reg = ACP_P1_SW_BT_TX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW0_AUDIO_RX:
+		ch_enable_reg = ACP_SW_AUDIO_RX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW0_HS_RX:
+		ch_enable_reg = ACP_SW_HEADSET_RX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW0_BT_RX:
+		ch_enable_reg = ACP_SW_BT_RX_CHANNEL_ENABLE_DP0;
+		break;
+	case ACP_SDW1_BT_RX:
+		ch_enable_reg = ACP_P1_SW_BT_RX_CHANNEL_ENABLE_DP0;
+		break;
+	default:
+		dev_err(bus->dev, "%s:Invalid channel:%d\n", __func__, channel_type);
+		return -EINVAL;
+	}
+
+	dpn_ch_enable =  acp_reg_readl(ctrl->mmio + ch_enable_reg);

Double space after '='.

+	u32p_replace_bits(&dpn_ch_enable, enable_ch->ch_mask, AMD_DPN_CH_EN_CHMASK);
+	if (enable_ch->enable)
+		acp_reg_writel(dpn_ch_enable, ctrl->mmio + ch_enable_reg);
+	else
+		acp_reg_writel(0, ctrl->mmio + ch_enable_reg);
+	return 0;
+}
+

...

+
+static void amd_sdwc_probe_work(struct work_struct *work)
+{
+	struct amd_sdwc_ctrl *ctrl  = container_of(work, struct amd_sdwc_ctrl, probe_work);

Double space before '='.

+	struct sdw_master_prop *prop;
+	int ret;
+
+	prop = &ctrl->bus.prop;
+	if (!prop->hw_disabled) {
+		ret = amd_enable_sdw_pads(ctrl);
+		if (ret)
+			return;
+		ret = amd_init_sdw_controller(ctrl);
+		if (ret)
+			return;
+		amd_enable_sdw_interrupts(ctrl);
+		ret = amd_enable_sdw_controller(ctrl);
+		if (ret)
+			return;
+		ret = amd_sdwc_set_frameshape(ctrl, 50, 10);
+		if (!ret)
+			ctrl->startup_done = true;
+	}
+}
+
+static int amd_sdwc_probe(struct platform_device *pdev)
+{
+	const struct acp_sdw_pdata *pdata = pdev->dev.platform_data;
+	struct resource *res;
+	struct device *dev = &pdev->dev;

Same as in previous patch, you assign dev here, but keep using &pdev->dev below?

+	struct sdw_master_prop *prop;
+	struct sdw_bus_params *params;
+	struct amd_sdwc_ctrl *ctrl;
+	int ret;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "platform_data not retrieved\n");
+		return -ENODEV;
+	}
+	ctrl = devm_kzalloc(&pdev->dev, sizeof(struct amd_sdwc_ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "IORESOURCE_MEM FAILED\n");
+		return -ENOMEM;
+	}
+	ctrl->mmio = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (IS_ERR(ctrl->mmio)) {
+		dev_err(&pdev->dev, "mmio not found\n");
+		return PTR_ERR(ctrl->mmio);
+	}
+	ctrl->instance = pdata->instance;
+	ctrl->sdw_lock  = pdata->sdw_lock;

Double space before '='.

+	ctrl->rows_index = sdw_find_row_index(50);
+	ctrl->cols_index = sdw_find_col_index(10);
+
+	ctrl->dev = dev;
+	dev_set_drvdata(&pdev->dev, ctrl);
+
+	ctrl->bus.ops = &amd_sdwc_ops;
+	ctrl->bus.port_ops = &amd_sdwc_port_ops;
+	ctrl->bus.compute_params = &amd_sdwc_compute_params;
+	ctrl->bus.clk_stop_timeout = 1;
+	switch (ctrl->instance) {
+	case ACP_SDW0:
+		ctrl->num_dout_ports =  AMD_SDW0_MAX_TX_PORTS;

Double space after '='.

+		ctrl->num_din_ports = AMD_SDW0_MAX_RX_PORTS;
+		break;
+	case ACP_SDW1:
+		ctrl->num_dout_ports = AMD_SDW1_MAX_TX_PORTS;
+		ctrl->num_din_ports = AMD_SDW1_MAX_RX_PORTS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	params = &ctrl->bus.params;
+	params->max_dr_freq = AMD_SDW_DEFAULT_CLK_FREQ * 2;
+	params->curr_dr_freq = AMD_SDW_DEFAULT_CLK_FREQ * 2;
+	params->col = 10;
+	params->row = 50;
+
+	prop = &ctrl->bus.prop;
+	prop->clk_freq = &amd_sdwc_freq_tbl[0];
+	prop->mclk_freq = AMD_SDW_BUS_BASE_FREQ;
+	ctrl->bus.link_id = ctrl->instance;
+	ret = sdw_bus_master_add(&ctrl->bus, dev, dev->fwnode);
+	if (ret) {
+		dev_err(dev, "Failed to register Soundwire controller (%d)\n",
+			ret);
+		return ret;
+	}
+	INIT_WORK(&ctrl->probe_work, amd_sdwc_probe_work);
+	schedule_work(&ctrl->probe_work);
+	return 0;
+}
+
+static int amd_sdwc_remove(struct platform_device *pdev)
+{
+	struct amd_sdwc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+	int ret;
+

You may need to cancel work if someone tries to unload driver before probe work completes. Something like

cancel_work_sync(&ctrl->probe_work);

should probably work here.

+	amd_disable_sdw_interrupts(ctrl);
+	sdw_bus_master_delete(&ctrl->bus);
+	ret = amd_disable_sdw_controller(ctrl);
+	return ret;
+}
+





[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux