On Sat, 24 Dec 2022 00:31:55 +0100,
Wesley Cheng wrote:
>
> Several Qualcomm SoCs have a dedicated audio DSP, which has the ability to
> support USB sound devices. This vendor driver will implement the required
> handshaking with the DSP, in order to pass along required resources that
> will be utilized by the DSP's USB SW. The communication channel used for
> this handshaking will be using the QMI protocol. Required resources
> include:
> - Allocated secondary event ring address
> - EP transfer ring address
> - Interrupter number
>
> The above information will allow for the audio DSP to execute USB transfers
> over the USB bus. It will also be able to support devices that have an
> implicit feedback and sync endpoint as well. Offloading these data
> transfers will allow the main/applications processor to enter lower CPU
> power modes, and sustain a longer duration in those modes.
>
> Signed-off-by: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
Hmm, this must be the main part that works to bypass the normal USB
packet handling in USB audio driver but hooks to the own offload one,
but there is no description how to take over and manage.
A missing "big picture" makes it difficult to understand and review.
Also, since both drivers are asynchronous, we may need some proper
locking.
More on the code change:
> +static int snd_interval_refine_set(struct snd_interval *i, unsigned int val)
> +{
> + struct snd_interval t;
> +
> + t.empty = 0;
> + t.min = t.max = val;
> + t.openmin = t.openmax = 0;
> + t.integer = 1;
> + return snd_interval_refine(i, &t);
> +}
> +
> +static int _snd_pcm_hw_param_set(struct snd_pcm_hw_params *params,
> + snd_pcm_hw_param_t var, unsigned int val,
> + int dir)
> +{
> + int changed;
> +
> + if (hw_is_mask(var)) {
> + struct snd_mask *m = hw_param_mask(params, var);
> +
> + if (val == 0 && dir < 0) {
> + changed = -EINVAL;
> + snd_mask_none(m);
> + } else {
> + if (dir > 0)
> + val++;
> + else if (dir < 0)
> + val--;
> + changed = snd_mask_refine_set(
> + hw_param_mask(params, var), val);
> + }
> + } else if (hw_is_interval(var)) {
> + struct snd_interval *i = hw_param_interval(params, var);
> +
> + if (val == 0 && dir < 0) {
> + changed = -EINVAL;
> + snd_interval_none(i);
> + } else if (dir == 0)
> + changed = snd_interval_refine_set(i, val);
> + else {
> + struct snd_interval t;
> +
> + t.openmin = 1;
> + t.openmax = 1;
> + t.empty = 0;
> + t.integer = 0;
> + if (dir < 0) {
> + t.min = val - 1;
> + t.max = val;
> + } else {
> + t.min = val;
> + t.max = val+1;
> + }
> + changed = snd_interval_refine(i, &t);
> + }
> + } else
> + return -EINVAL;
> + if (changed) {
> + params->cmask |= 1 << var;
> + params->rmask |= 1 << var;
> + }
> + return changed;
> +}
Those are taken from sound/core/oss/pcm_oss.c? We may put to the
common PCM helper instead of duplication.
> +static void disable_audio_stream(struct snd_usb_substream *subs)
> +{
> + struct snd_usb_audio *chip = subs->stream->chip;
> +
> + if (subs->data_endpoint || subs->sync_endpoint) {
> + close_endpoints(chip, subs);
> +
> + mutex_lock(&chip->mutex);
> + subs->cur_audiofmt = NULL;
> + mutex_unlock(&chip->mutex);
> + }
> +
> + snd_usb_autosuspend(chip);
> +}
> +
> +static int enable_audio_stream(struct snd_usb_substream *subs,
> + snd_pcm_format_t pcm_format,
> + unsigned int channels, unsigned int cur_rate,
> + int datainterval)
> +{
> + struct snd_usb_audio *chip = subs->stream->chip;
> + struct snd_pcm_hw_params params;
> + const struct audioformat *fmt;
> + int ret;
> +
> + _snd_pcm_hw_params_any(¶ms);
> + _snd_pcm_hw_param_set(¶ms, SNDRV_PCM_HW_PARAM_FORMAT,
> + pcm_format, 0);
> + _snd_pcm_hw_param_set(¶ms, SNDRV_PCM_HW_PARAM_CHANNELS,
> + channels, 0);
> + _snd_pcm_hw_param_set(¶ms, SNDRV_PCM_HW_PARAM_RATE,
> + cur_rate, 0);
What about other parameters like period / buffer sizes?
> +struct qmi_uaudio_stream_req_msg_v01 {
> + u8 enable;
> + u32 usb_token;
> + u8 audio_format_valid;
> + u32 audio_format;
> + u8 number_of_ch_valid;
> + u32 number_of_ch;
> + u8 bit_rate_valid;
> + u32 bit_rate;
> + u8 xfer_buff_size_valid;
> + u32 xfer_buff_size;
> + u8 service_interval_valid;
> + u32 service_interval;
> +};
Are this and the other structs a part of DSP ABI?
Or is it a definition only used in kernel? I'm asking because
__packed attribute is required for most of ABI definitions with
different field types.
thanks,
Takashi
