[PATCH 6/8] arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index daca1e0ad62a..1980080fffa7 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -720,7 +720,7 @@ swm: swm@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -728,7 +728,7 @@ left_spkr: speaker@0,3 {
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
-- 
2.34.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux