On 12/16/22 10:55, Ajye Huang wrote:
> Hi Pierre
>
> On Sat, Dec 17, 2022 at 12:03 AM Pierre-Louis Bossart
> <pierre-louis.bossart@xxxxxxxxxxxxxxx> wrote:
>
>> On 12/16/22 09:49, Ajye Huang wrote:
>>> This patch adds the driver data for two nau8318 speaker amplifiers on
>>> SSP1 and nau8825 on SSP0 for ADL platform.
>>
>> So here you are making reference to two amplifiers...
>>
>>> +static struct snd_soc_dai_link_component nau8318_components[] = {
>>> + {
>>> + .name = "NVTN2012:00",
>>> + .dai_name = "nau8315-hifi",
>>> + }
>>> +};
>>
>> but here there's only one? I was expecting something like what we've
>> used for Maxim amplifiers with a codec configuration and dailink
>> components that list the two amplifiers.
>>
>> static struct snd_soc_codec_conf max_98373_codec_conf[] = {
>> {
>> .dlc = COMP_CODEC_CONF(MAX_98373_DEV0_NAME),
>> .name_prefix = "Right",
>> },
>> {
>> .dlc = COMP_CODEC_CONF(MAX_98373_DEV1_NAME),
>> .name_prefix = "Left",
>> },
>> };
>>
>> struct snd_soc_dai_link_component max_98373_components[] = {
>> { /* For Right */
>> .name = MAX_98373_DEV0_NAME,
>> .dai_name = MAX_98373_CODEC_DAI,
>> },
>> { /* For Left */
>> .name = MAX_98373_DEV1_NAME,
>> .dai_name = MAX_98373_CODEC_DAI,
>> },
>> };
>>
>> Or is this a commit message problem and there's really only one amplifier?
>
> Really , it has two speakers. The nau8318 is an auto mode Amplifier
> chip, similar to the max98360a amp chip.
> EX: Sof_maxim_common.c (sound\soc\intel\boards):
> static struct snd_soc_dai_link_component max_98360a_components[] = {
> {
> .name = MAX_98360A_DEV0_NAME,
> .dai_name = MAX_98357A_CODEC_DAI,
> }
> };
> It is not an i2c interface, from the nau8318 data sheet, there are
> five pins used mainly. one for enable, others for I2S.
> EN-- enable pin
> FSR-- Frame Sync, Right
> FSL-- Frame Sync, Left
> BCLK-- bit clock
> DACIN-- Input i2s data
>
> The FSR and FSL pins are for Left and Right channels used.
> thanks
Ok, thanks for the explanations.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
