The default timeout for kselftests is 45 seconds, but that isn't enough time to run pcm-test when there are many PCMs on the device, nor for mixer-test when slower control buses and fancier CODECs are present. As data points, running pcm-test on mt8192-asurada-spherion takes about 1m15s, and mixer-test on rk3399-gru-kevin takes about 2m. Set the timeout to 4 minutes to allow both pcm-test and mixer-test to run to completion with some slack. Reviewed-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> --- Changes in v2: - Reduced timeout from 10 to 4 minutes - Tweaked commit message to also mention mixer-test and run time for mixer-test on rk3399-gru-kevin tools/testing/selftests/alsa/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/alsa/settings diff --git a/tools/testing/selftests/alsa/settings b/tools/testing/selftests/alsa/settings new file mode 100644 index 000000000000..b478e684846a --- /dev/null +++ b/tools/testing/selftests/alsa/settings @@ -0,0 +1 @@ +timeout=240 -- 2.39.0
