Hi All, I'm looking to enhance the cs5535 driver (Geode companion device) so that it can support 5.1 operation when used with an appropriate AC97 codec. AFAIK, the existing ALSA driver only supports 2-channel operation. Having looked at the existing driver, and Takashi Iwai's guide, there is still something I'm not too clear on - I hope you can set me straight. According to the AMD datasheet, when used in 5.1 mode the cs5535 makes use of 4 distinct DMAs - the first (BM0) is the main L/R pair, and this is the one used by the existing driver. There is another DMA for L/R surround, another for the centre channel, and the fourth DMA feeds the LFE channel. Two stereos and two monos. I'm comfortable with the low-level bit bashing: what I'm unsure of is what is necessary to represent all of this to the upper layers so that the ALSA clients see me as a 6-channel device. Do I need to represent the 4 DMAs as substreams of the playback pcm, for example? Or have I completely misunderstood what a substream is? Alternatively, pointers to an existing driver that faces the same issue would be very welcome. Vince _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
