The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/cs42l51.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index 51721edd8f53c..e88d9ff95cdfc 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -143,7 +143,7 @@ static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
0, 0xA0, 96, adc_att_tlv),
SOC_DOUBLE_R_SX_TLV("PGA Volume",
CS42L51_ALC_PGA_CTL, CS42L51_ALC_PGB_CTL,
- 0, 0x19, 30, pga_tlv),
+ 0, 0x1A, 30, pga_tlv),
SOC_SINGLE("Playback Deemphasis Switch", CS42L51_DAC_CTL, 3, 1, 0),
SOC_SINGLE("Auto-Mute Switch", CS42L51_DAC_CTL, 2, 1, 0),
SOC_SINGLE("Soft Ramp Switch", CS42L51_DAC_CTL, 1, 1, 0),
--
2.30.2
