On Tue, 08 Nov 2022 12:59:14 +0100, Jaroslav Kysela wrote: > > This initial code does a simple sample transfer tests. By default, > all PCM devices are detected and tested with short and long > buffering parameters for 4 seconds. If the sample transfer timing > is not in a +-100ms boundary, the test fails. Only the interleaved > buffering scheme is supported in this version. > > The configuration may be modified with the configuration files. > A specific hardware configuration is detected and activated > using the sysfs regex matching. This allows to use the DMI string > (/sys/class/dmi/id/* tree) or any other system parameters > exposed in sysfs for the matching for the CI automation. > > The configuration file may also specify the PCM device list to detect > the missing PCM devices. > > v1..v2: > - added missing alsa-local.h header file > > Cc: Mark Brown <broonie@xxxxxxxxxx> > Cc: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxx> > Cc: Liam Girdwood <liam.r.girdwood@xxxxxxxxx> > Cc: Jesse Barnes <jsbarnes@xxxxxxxxxx> > Cc: Jimmy Cheng-Yi Chiang <cychiang@xxxxxxxxxx> > Cc: Curtis Malainey <cujomalainey@xxxxxxxxxx> > Cc: Brian Norris <briannorris@xxxxxxxxxxxx> > Signed-off-by: Jaroslav Kysela <perex@xxxxxxxx> Sorry for the late reply. The patch looks good and works fine on the smoke test, so I applied it now. There are a few issues Mark already commented on, and we can fix or improve them in incremental manner later. thanks, Takashi
