On 08/11/2022 14:29, Srinivasa Rao Mandadapu wrote:
>>> + qcom,ports-block-pack-mode:
>>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>>> + description: Indicate the block packing mode.
>>> + 0 to indicate Blocks are per Channel
>>> + 1 to indicate Blocks are per Port.
>>> + Out ports followed by In ports.
>>> + Value of 0xFF indicates that this option is not implemented
>>> + or applicable for the respective data port.
>>> + More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> + minItems: 3
>>> + maxItems: 8
>>> +
>>> + qcom,ports-hstart:
>>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>>> + description: Identifying lowerst numbered coloum in
>>> + SoundWire Frame, i.e. left edge of the Transport sub-frame
>>> + for each port. Values between 0 and 15 are valid.
>> minimum: 0
>> maximum: 15
>> and drop that one sentence.
>>
>> The same in other places.
>
> As below mentioned it will also have 0xFF value. I think we can't
> restrict with minimum and maximum values.
>
> Please suggest if my understanding is wrong.
Then (and it is actually an array):
minItems: 3
maxItems: 5
items:
oneOf:
- minimum: 0
maximum: 15
- const: 0xff
>
>>
>>> + Out ports followed by In ports.
>>> + Value of 0xFF indicates that this option is not implemented
>>> + or applicable for the respective data port.
>>> + More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> + minItems: 3
>>> + maxItems: 5
>>> +
>>> + qcom,ports-hstop:
>>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>>> + description: Identifying highest numbered coloum in
>>> + SoundWire Frame, i.e. the right edge of the Transport
>>> + sub-frame for each port. Values between 0 and 15 are valid.
>>> + Out ports followed by In ports.
>>> + Value of 0xFF indicates that this option is not implemented
>>> + or applicable for the respective data port.
>>> + More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> + minItems: 3
>>> + maxItems: 5
>>> +
>>> + qcom,ports-block-group-count:
>>> + $ref: /schemas/types.yaml#/definitions/uint8-array
>>> + description: In range 1 to 4 to indicate how many sample
>>> + intervals are combined into a payload.
>>> + Out ports followed by In ports.
>>> + Value of 0xFF indicates that this option is not implemented
>>> + or applicable for the respective data port.
>>> + More info in MIPI Alliance SoundWire 1.0 Specifications.
>>> + minItems: 3
>>> + maxItems: 5
>>> +
>>> + label:
>>> + maxItems: 1
>>> +
>>> +patternProperties:
>>> + "^.*@[0-9a-f],[0-9a-f]$":
>>> + type: object
>>> + description: Child nodes for a standalone audio codec or speaker amplifier IC.
>>> + It has RX and TX Soundwire slave devices.
>> s/slave/secondary/
>>
>> This is some odd indentation. Please use standard, like example-schema
>> is showing, so:
>>
>> description:
>> Child nodes for a standalone audio codec or speaker amplifier IC.
>> RX and TX Soundwire slave devices.
>>
>> It looks you used such pattern in other places here - they should also
>> be corrected.
> Okay. Will change accordingly.
>>
>>> + properties:
>>> + compatible:
>>> + pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
>>> +
>>
>> Best regards,
>> Krzysztof
>>
Best regards,
Krzysztof
