"mclk" is retrieved from the configuration and assigned to adau1372->clk.
However adau1372->mclk (==NULL) is used for clk_prepare_enable() and
clk_disable_unprepare() which don't have any effect.
Remove .clk from struct adau1372 and use .mclk throughout.
This change ensures that the input clock is switched on/off when the
bias level is changed.
Signed-off-by: Maarten Zanders <maarten.zanders@xxxxxxx>
---
sound/soc/codecs/adau1372.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/adau1372.c b/sound/soc/codecs/adau1372.c
index a9f89e8565ec..00d0825e193b 100644
--- a/sound/soc/codecs/adau1372.c
+++ b/sound/soc/codecs/adau1372.c
@@ -25,7 +25,6 @@
#include "adau-utils.h"
struct adau1372 {
- struct clk *clk;
struct regmap *regmap;
void (*switch_mode)(struct device *dev);
bool use_pll;
@@ -925,9 +924,9 @@ int adau1372_probe(struct device *dev, struct regmap *regmap,
if (!adau1372)
return -ENOMEM;
- adau1372->clk = devm_clk_get(dev, "mclk");
- if (IS_ERR(adau1372->clk))
- return PTR_ERR(adau1372->clk);
+ adau1372->mclk = devm_clk_get(dev, "mclk");
+ if (IS_ERR(adau1372->mclk))
+ return PTR_ERR(adau1372->mclk);
adau1372->pd_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH);
if (IS_ERR(adau1372->pd_gpio))
@@ -947,7 +946,7 @@ int adau1372_probe(struct device *dev, struct regmap *regmap,
* 12.288MHz. Automatically choose a valid configuration from the
* external clock.
*/
- rate = clk_get_rate(adau1372->clk);
+ rate = clk_get_rate(adau1372->mclk);
switch (rate) {
case 12288000:
--
2.37.3
