In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile
register, but this register mixes a bunch of volatile status bits and a
bunch of non-volatile control bits. The dapm widgets TEMP_HP and
TEMP_SPK leverages the control bits in this register. After the wm8962
probe, the regmap will bet set to cache only mode, then a read error
like below would be triggered when trying to read the initial power
state of the dapm widgets TEMP_HP and TEMP_SPK.
wm8962 0-001a: ASoC: error at soc_component_read_no_lock
on wm8962.0-001a: -16
In order to fix this issue, we add event handler to actually power
up/down these widgets. With this change, we also need to explicitly
power off these widgets in the wm8962 probe since they are enabled
by default.
Signed-off-by: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx>
---
sound/soc/codecs/wm8962.c | 54 +++++++++++++++++++++++++++++++++++++--
1 file changed, 52 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 398c448ea854..6df06fba4377 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1840,6 +1840,49 @@ SOC_SINGLE_TLV("SPKOUTR Mixer DACR Volume", WM8962_SPEAKER_MIXER_5,
4, 1, 0, inmix_tlv),
};
+static int tp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ int ret, reg, val, mask;
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+
+ ret = pm_runtime_resume_and_get(component->dev);
+ if (ret < 0) {
+ dev_err(component->dev, "Failed to resume device: %d\n", ret);
+ return ret;
+ }
+
+ reg = WM8962_ADDITIONAL_CONTROL_4;
+
+ if (!strcmp(w->name, "TEMP_HP")) {
+ mask = WM8962_TEMP_ENA_HP_MASK;
+ val = WM8962_TEMP_ENA_HP;
+ } else if (!strcmp(w->name, "TEMP_SPK")) {
+ mask = WM8962_TEMP_ENA_SPK_MASK;
+ val = WM8962_TEMP_ENA_SPK;
+ } else {
+ pm_runtime_put(component->dev);
+ return -EINVAL;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMD:
+ val = 0;
+ fallthrough;
+ case SND_SOC_DAPM_POST_PMU:
+ ret = snd_soc_component_update_bits(component, reg, mask, val);
+ break;
+ default:
+ WARN(1, "Invalid event %d\n", event);
+ pm_runtime_put(component->dev);
+ return -EINVAL;
+ }
+
+ pm_runtime_put(component->dev);
+
+ return 0;
+}
+
static int cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -2140,8 +2183,10 @@ SND_SOC_DAPM_SUPPLY("TOCLK", WM8962_ADDITIONAL_CONTROL_1, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DSP2", 1, WM8962_DSP2_POWER_MANAGEMENT,
WM8962_DSP2_ENA_SHIFT, 0, dsp2_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
-SND_SOC_DAPM_SUPPLY("TEMP_HP", WM8962_ADDITIONAL_CONTROL_4, 2, 0, NULL, 0),
-SND_SOC_DAPM_SUPPLY("TEMP_SPK", WM8962_ADDITIONAL_CONTROL_4, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TEMP_HP", SND_SOC_NOPM, 0, 0, tp_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TEMP_SPK", SND_SOC_NOPM, 0, 0, tp_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER("INPGAL", WM8962_LEFT_INPUT_PGA_CONTROL, 4, 0,
inpgal, ARRAY_SIZE(inpgal)),
@@ -3763,6 +3808,11 @@ static int wm8962_i2c_probe(struct i2c_client *i2c)
if (ret < 0)
goto err_pm_runtime;
+ regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4,
+ WM8962_TEMP_ENA_HP_MASK, 0);
+ regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4,
+ WM8962_TEMP_ENA_SPK_MASK, 0);
+
regcache_cache_only(wm8962->regmap, true);
/* The drivers should power up as needed */
--
2.25.1
