The Amp is already control in userspace before trigger calibrate function. Remove unnecessary control in calibrate function. Signed-off-by: Steve Lee <steve.lee.analog@xxxxxxxxx> --- sound/soc/codecs/max98390.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index 91c0bf3d76fc..99e769190568 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -826,9 +826,6 @@ static int max98390_dsm_calibrate(struct snd_soc_component *component) struct max98390_priv *max98390 = snd_soc_component_get_drvdata(component); - regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x81); - regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x01); - regmap_read(max98390->regmap, THERMAL_RDC_RD_BACK_BYTE1, &rdc); regmap_read(max98390->regmap, @@ -847,9 +844,6 @@ static int max98390_dsm_calibrate(struct snd_soc_component *component) dev_info(component->dev, "rdc resistance about %d.%02d ohm, reg=0x%X temp reg=0x%X\n", rdc_integer, rdc_factor, rdc_cal_result, temp); - regmap_write(max98390->regmap, MAX98390_R23FF_GLOBAL_EN, 0x00); - regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); - return 0; } -- 2.17.1