I am testing many headsets on Android platform with different kernel versions. On kernel-5.10, calling sequence for playback is 1. snd_usb_hw_params -> set highest sampling rate, no SAMPLING_FREQ_CONTROL USB request sent in this stage 2. snd_pcm_release 3. snd_usb_hw_params -> set proper sampling rate, still no SAMPLING_FREQ_CONTROL USB request 4. snd_usb_pcm_parepare -> in configure_endpoint SAMPLING_FREQ_CONTROL USB request was sent on USB bus With the same calling sequence, a slightly behavior change on kernel- 5.15 is 1. snd_usb_hw_params -> set highest sampling rate, SAMPLING_FREQ_CONTROL USB request was sent on USB bus 2. snd_pcm_release 3. snd_usb_hw_params -> set proper sampling rate, SAMPLING_FREQ_CONTROL USB request was sent too (because configure_endpoint was moved to snd_usb_hw_params function) 4. snd_usb_pcm_parepare -> no SAMPLING_FREQ_CONTROL USB request because of USB EP flag check I checked all USB packets and confirmed audio data output was correct. But there may be missing sound problem for the first sound with many headsets (for example Samsung headset). I found this issue is related to two-times sampling rate set request. (I tried to forcibly skip first USB request, everything became okay.) So do you guys know why configure_endpoint was moved to snd_usb_hw_params? Or could you provide patch for this problem? Many thanks Chihhao
