On 19/08/2022 15:54, Martin Povišer wrote:
> Add the MCA I2S transceiver node and its supporting NCO, ADMAC nodes.
>
> Signed-off-by: Martin Povišer <povik+lin@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/apple/t8103.dtsi | 70 ++++++++++++++++++++++++++++
> 1 file changed, 70 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
> index 51a63b29d404..2dc3125aca5b 100644
> --- a/arch/arm64/boot/dts/apple/t8103.dtsi
> +++ b/arch/arm64/boot/dts/apple/t8103.dtsi
> @@ -532,6 +532,76 @@ port02: pci@2,0 {
> <0 0 0 4 &port02 0 0 0 3>;
> };
> };
> +
> + dart_sio: iommu@235004000 {
> + compatible = "apple,t8103-dart", "apple,dart";
> + reg = <0x2 0x35004000 0x0 0x4000>;
> + interrupt-parent = <&aic>;
> + interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
> + #iommu-cells = <1>;
> + power-domains = <&ps_sio_cpu>;
> + };
> +
> + nco_clkref: clock-ref {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <900000000>;
> + clock-output-names = "nco_ref";
> + };
Reference clocks are usually physically outside of SoC (e.g. on the
board), so:
1. Not part of "soc" node.
2. It should be defined by board. At least clock-frequency should be there.
> +
> + nco: nco@23b044000 {
> + compatible = "apple,t8103-nco", "apple,nco";
> + reg = <0x2 0x3b044000 0x0 0x14000>;
> + clocks = <&nco_clkref>;
> + #clock-cells = <1>;
> + };
> +
> + admac: dma-controller@238200000 {
> + compatible = "apple,t8103-admac", "apple,admac";
> + reg = <0x2 0x38200000 0x0 0x34000>;
> + dma-channels = <24>;
> + interrupts-extended = <0>,
> + <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
> + <0>,
> + <0>;
> + #dma-cells = <1>;
> + iommus = <&dart_sio 2>;
> + power-domains = <&ps_sio_adma>;
> + };
> +
> + mca: mca@38400000 {
Here node name is as well wrong.
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Best regards,
Krzysztof
