The driver is setting the PWR_CTRL field in both the set_bias_level callback and on DAPM events of the DAC widget (and also in the mute_stream method). Drop the set_bias_level callback altogether as the power setting it does is in conflict with the other code paths. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin@xxxxxxxxxxx> --- sound/soc/codecs/tas2770.c | 33 --------------------------------- 1 file changed, 33 deletions(-) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index db446db88df5..10a79f8139be 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -46,38 +46,6 @@ static void tas2770_reset(struct tas2770_priv *tas2770) usleep_range(1000, 2000); } -static int tas2770_set_bias_level(struct snd_soc_component *component, - enum snd_soc_bias_level level) -{ - struct tas2770_priv *tas2770 = - snd_soc_component_get_drvdata(component); - - switch (level) { - case SND_SOC_BIAS_ON: - snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, - TAS2770_PWR_CTRL_MASK, - TAS2770_PWR_CTRL_ACTIVE); - break; - case SND_SOC_BIAS_STANDBY: - case SND_SOC_BIAS_PREPARE: - snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, - TAS2770_PWR_CTRL_MASK, - TAS2770_PWR_CTRL_MUTE); - break; - case SND_SOC_BIAS_OFF: - snd_soc_component_update_bits(component, TAS2770_PWR_CTRL, - TAS2770_PWR_CTRL_MASK, - TAS2770_PWR_CTRL_SHUTDOWN); - break; - - default: - dev_err(tas2770->dev, "wrong power level setting %d\n", level); - return -EINVAL; - } - - return 0; -} - #ifdef CONFIG_PM static int tas2770_codec_suspend(struct snd_soc_component *component) { @@ -555,7 +523,6 @@ static const struct snd_soc_component_driver soc_component_driver_tas2770 = { .probe = tas2770_codec_probe, .suspend = tas2770_codec_suspend, .resume = tas2770_codec_resume, - .set_bias_level = tas2770_set_bias_level, .controls = tas2770_snd_controls, .num_controls = ARRAY_SIZE(tas2770_snd_controls), .dapm_widgets = tas2770_dapm_widgets, -- 2.33.0