Convert bindings for TI's TLV320AIC3x audio codecs to dtschema.
Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
---
.../devicetree/bindings/sound/tlv320aic3x.txt | 97 ------------
.../bindings/sound/tlv320aic3x.yaml | 145 ++++++++++++++++++
2 files changed, 145 insertions(+), 97 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt
create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.yaml
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
deleted file mode 100644
index 20931a63fd64..000000000000
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Texas Instruments - tlv320aic3x Codec module
-
-The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols
-
-Required properties:
-
-- compatible - "string" - One of:
- "ti,tlv320aic3x" - Generic TLV320AIC3x device
- "ti,tlv320aic33" - TLV320AIC33
- "ti,tlv320aic3007" - TLV320AIC3007
- "ti,tlv320aic3106" - TLV320AIC3106
- "ti,tlv320aic3104" - TLV320AIC3104
-
-
-- reg - <int> - I2C slave address
-
-
-Optional properties:
-
-- reset-gpios - GPIO specification for the active low RESET input.
-- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
- - Not supported on tlv320aic3104
-- ai3x-micbias-vg - MicBias Voltage required.
- 1 - MICBIAS output is powered to 2.0V,
- 2 - MICBIAS output is powered to 2.5V,
- 3 - MICBIAS output is connected to AVDD,
- If this node is not mentioned or if the value is incorrect, then MicBias
- is powered down.
-- ai3x-ocmv - Output Common-Mode Voltage selection:
- 0 - 1.35V,
- 1 - 1.5V,
- 2 - 1.65V,
- 3 - 1.8V
-- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
- device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
-
-Deprecated properties:
-
-- gpio-reset - gpio pin number used for codec reset
-
-CODEC output pins:
- * LLOUT
- * RLOUT
- * MONO_LOUT
- * HPLOUT
- * HPROUT
- * HPLCOM
- * HPRCOM
-
-CODEC input pins for TLV320AIC3104:
- * MIC2L
- * MIC2R
- * LINE1L
- * LINE1R
-
-CODEC input pins for other compatible codecs:
- * MIC3L
- * MIC3R
- * LINE1L
- * LINE2L
- * LINE1R
- * LINE2R
-
-The pins can be used in referring sound node's audio-routing property.
-
-I2C example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-tlv320aic3x: tlv320aic3x@1b {
- compatible = "ti,tlv320aic3x";
- reg = <0x1b>;
-
- reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-
- AVDD-supply = <®ulator>;
- IOVDD-supply = <®ulator>;
- DRVDD-supply = <®ulator>;
- DVDD-supply = <®ulator>;
-};
-
-SPI example:
-
-spi0: spi@f0000000 {
- tlv320aic3x: codec@0 {
- compatible = "ti,tlv320aic3x";
- reg = <0>; /* CS number */
- #sound-dai-cells = <0>;
- spi-max-frequency = <1000000>;
-
- AVDD-supply = <®ulator>;
- IOVDD-supply = <®ulator>;
- DRVDD-supply = <®ulator>;
- DVDD-supply = <®ulator>;
- ai3x-ocmv = <0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml
new file mode 100644
index 000000000000..6efb1d459543
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings
+
+maintainers:
+ - Jai Luthra <j-luthra@xxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - ti,tlv320aic3x
+ - ti,tlv320aic33
+ - ti,tlv320aic3007
+ - ti,tlv320aic3106
+ - ti,tlv320aic3104
+
+ reg:
+ maxItems: 1
+ description: i2c slave address
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ GPIO specification for the active low RESET input.
+
+ ai3x-gpio-func:
+ description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minItems: 3
+ maxItems: 3
+
+ ai3x-micbias-vg:
+ description: MicBias required voltage. If node is omitted then MicBias is powered down.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - const: 1
+ description: MICBIAS output is powered to 2.0V.
+ - const: 2
+ description: MICBIAS output is powered to 2.5V.
+ - const: 3
+ description: MICBIAS output is connected to AVDD.
+
+ ai3x-ocmv:
+ description: Output Common-Mode Voltage selection.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - const: 0
+ description: 1.35V
+ - const: 1
+ description: 1.5V
+ - const: 2
+ description: 1.65V
+ - const: 3
+ description: 1.8V
+
+ AVDD-supply:
+ description: Analog DAC voltage.
+
+ IOVDD-supply:
+ description: I/O voltage.
+
+ DRVDD-supply:
+ description: ADC analog and output driver voltage.
+
+ DVDD-supply:
+ description: Digital core voltage.
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+#The pins can be used in referring sound node's audio-routing property.
+
+#CODEC output pins:
+ # LLOUT
+ # RLOUT
+ # MONO_LOUT
+ # HPLOUT
+ # HPROUT
+ # HPLCOM
+ # HPRCOM
+
+#CODEC input pins for TLV320AIC3104:
+ # MIC2L
+ # MIC2R
+ # LINE1L
+ # LINE1R
+
+#CODEC input pins for other compatible codecs:
+ # MIC3L
+ # MIC3R
+ # LINE1L
+ # LINE2L
+ # LINE1R
+ # LINE2R
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tlv320aic3x_i2c: tlv320aic3x@1b {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x1b>;
+
+ reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+ AVDD-supply = <®ulator>;
+ IOVDD-supply = <®ulator>;
+ DRVDD-supply = <®ulator>;
+ DVDD-supply = <®ulator>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tlv320aic3x_spi: codec@0 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0>; /* CS number */
+ #sound-dai-cells = <0>;
+
+ AVDD-supply = <®ulator>;
+ IOVDD-supply = <®ulator>;
+ DRVDD-supply = <®ulator>;
+ DVDD-supply = <®ulator>;
+ ai3x-ocmv = <0>;
+ };
+ };
+
+...
--
2.17.1
