[PATCH v3] ASoC: dt-bindings: fsl,sai: Convert format to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the NXP SAI binding to DT schema format using json-schema.

The Synchronous Audio Interface (SAI) provides an interface that
supports full-duplex serial interfaces with frame synchronization
formats such as I2S, AC97, TDM, and codec/DSP interfaces.

Beside conversion, 'fsl,shared-interrupt' and '#sound-dai-cells'
are added for they are already used by some dts.

Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
changes in v3
- address comments from Krzysztof

changes in v2
- fix exclusive property issue
- fix order issue of compatible, clock-names, dma-names

 .../devicetree/bindings/sound/fsl,sai.yaml    | 221 ++++++++++++++++++
 .../devicetree/bindings/sound/fsl-sai.txt     |  95 --------
 2 files changed, 221 insertions(+), 95 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,sai.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt

diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
new file mode 100644
index 000000000000..86ee46755b0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Audio Interface (SAI).
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@xxxxxxx>
+
+description: |
+  The SAI is based on I2S module that used communicating with audio codecs,
+  which provides a synchronous audio interface that supports fullduplex
+  serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+  codec/DSP interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-sai
+          - fsl,imx6sx-sai
+          - fsl,imx6ul-sai
+          - fsl,imx7ulp-sai
+          - fsl,imx8mq-sai
+          - fsl,imx8qm-sai
+          - fsl,imx8ulp-sai
+      - items:
+          - enum:
+              - fsl,imx8mm-sai
+              - fsl,imx8mn-sai
+              - fsl,imx8mp-sai
+          - const: fsl,imx8mq-sai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: receive and transmit interrupt
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: master clock source 0 (obsoleted)
+      - description: master clock source 1
+      - description: master clock source 2
+      - description: master clock source 3
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: bus
+          - const: mclk0
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+      - items:
+          - const: bus
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+
+  lsb-first:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Configures whether the LSB or the MSB is transmitted
+      first for the fifo data. If this property is absent,
+      the MSB is transmitted first as default, or the LSB
+      is transmitted first.
+    type: boolean
+
+  big-endian:
+    description: |
+      required if all the SAI registers are big-endian rather than little-endian.
+    type: boolean
+
+  fsl,sai-synchronous-rx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      SAI will work in the synchronous mode (sync Tx with Rx) which means
+      both the transmitter and the receiver will send and receive data by
+      following receiver's bit clocks and frame sync clocks.
+    type: boolean
+
+  fsl,sai-asynchronous:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      SAI will work in the asynchronous mode, which means both transmitter
+      and receiver will send and receive data by following their own bit clocks
+      and frame sync clocks separately.
+      If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+      default synchronous mode (sync Rx with Tx) will be used, which means both
+      transmitter and receiver will send and receive data by following clocks
+      of transmitter.
+    type: boolean
+
+  fsl,dataline:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Configure the dataline. It has 3 value for each configuration
+    maxItems: 16
+    items:
+      items:
+        - description: format Default(0), I2S(1) or PDM(2)
+          enum: [0, 1, 2]
+        - description: dataline mask for 'rx'
+        - description: dataline mask for 'tx'
+
+  fsl,sai-mclk-direction-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: SAI will output the SAI MCLK clock.
+    type: boolean
+
+  fsl,shared-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Interrupt is shared with other modules.
+    type: boolean
+
+  "#sound-dai-cells":
+    const: 0
+    description: optional, some dts node didn't add it.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-sai
+    then:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for TX
+            - description: DMA controller phandle and request line for RX
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+    else:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for RX
+            - description: DMA controller phandle and request line for TX
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+  - if:
+      required:
+        - fsl,sai-asynchronous
+    then:
+      properties:
+        fsl,sai-synchronous-rx: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    sai2: sai@40031000 {
+        compatible = "fsl,vf610-sai";
+        reg = <0x40031000 0x1000>;
+        interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai2_1>;
+        clocks = <&clks VF610_CLK_PLATFORM_BUS>,
+                 <&clks VF610_CLK_SAI2>,
+                 <&clks 0>, <&clks 0>;
+        clock-names = "bus", "mclk1", "mclk2", "mclk3";
+        dma-names = "tx", "rx";
+        dmas = <&edma0 0 21>,
+               <&edma0 0 20>;
+        big-endian;
+        lsb-first;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    sai1: sai@30010000 {
+        compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+        reg = <0x30010000 0x10000>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+                 <&clk IMX8MM_CLK_DUMMY>,
+                 <&clk IMX8MM_CLK_SAI1_ROOT>,
+                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+        clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+        dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+        dma-names = "rx", "tx";
+        fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
deleted file mode 100644
index fbdefc3fade7..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Freescale Synchronous Audio Interface (SAI).
-
-The SAI is based on I2S module that used communicating with audio codecs,
-which provides a synchronous audio interface that supports fullduplex
-serial interfaces with frame synchronization such as I2S, AC97, TDM, and
-codec/DSP interfaces.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,vf610-sai",
-			  "fsl,imx6sx-sai", "fsl,imx6ul-sai",
-			  "fsl,imx7ulp-sai", "fsl,imx8mq-sai",
-			  "fsl,imx8qm-sai", "fsl,imx8mm-sai",
-			  "fsl,imx8mn-sai", "fsl,imx8mp-sai", or
-			  "fsl,imx8ulp-sai".
-
-  - reg			: Offset and length of the register set for the device.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "bus" for register access and
-			  "mclk1", "mclk2", "mclk3" for bit clock and frame
-			  clock providing.
-                          "pll8k", "pll11k" are optional, they are the clock
-                          source for root clock, one is for 8kHz series rates
-                          another one is for 11kHz series rates.
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - pinctrl-names	: Must contain a "default" entry.
-
-  - pinctrl-NNN		: One property must exist for each entry in
-			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-
-  - lsb-first		: Configures whether the LSB or the MSB is transmitted
-			  first for the fifo data. If this property is absent,
-			  the MSB is transmitted first as default, or the LSB
-			  is transmitted first.
-
-  - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
-			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transmitter and the
-			  receiver will send and receive data by following
-			  receiver's bit clocks and frame sync clocks.
-
-  - fsl,sai-asynchronous: This is a boolean property. If present, indicating
-			  that SAI will work in the asynchronous mode, which
-			  means both transmitter and receiver will send and
-			  receive data by following their own bit clocks and
-			  frame sync clocks separately.
-
-  - fsl,dataline        : configure the dataline. it has 3 value for each configuration
-                          first one means the type: I2S(1) or PDM(2)
-                          second one is dataline mask for 'rx'
-                          third one is dataline mask for 'tx'.
-                          for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
-                          it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
-                          rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).
-
-Optional properties:
-
-  - big-endian		: Boolean property, required if all the SAI
-			  registers are big-endian rather than little-endian.
-
-Optional properties (for mx6ul):
-
-  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
-			 indicates that SAI will output the SAI MCLK clock.
-
-Note:
-- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
-  default synchronous mode (sync Rx with Tx) will be used, which means both
-  transmitter and receiver will send and receive data by following clocks
-  of transmitter.
-- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
-
-Example:
-sai2: sai@40031000 {
-	      compatible = "fsl,vf610-sai";
-	      reg = <0x40031000 0x1000>;
-	      pinctrl-names = "default";
-	      pinctrl-0 = <&pinctrl_sai2_1>;
-	      clocks = <&clks VF610_CLK_PLATFORM_BUS>,
-		     <&clks VF610_CLK_SAI2>,
-		     <&clks 0>, <&clks 0>;
-	      clock-names = "bus", "mclk1", "mclk2", "mclk3";
-	      dma-names = "tx", "rx";
-	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
-		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian;
-	      lsb-first;
-};
-- 
2.34.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux