On Fri, Jul 22, 2022 at 06:55:12PM +0800, Raphael-Xu wrote: > revise the format Complete sentences. And this is not v8. Each new change is v1. > > Signed-off-by: Raphael-Xu <13691752556@xxxxxxx> > --- > .../devicetree/bindings/sound/tas27xx.yaml | 16 +++++++++++----- > 1 file changed, 11 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml > index 66a0df8850ea..573652577462 100644 > --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml > +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml > @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"; > title: Texas Instruments TAS2764/TAS2780 Smart PA > > maintainers: > - - Shenghao Ding <shenghao-ding@xxxxxx> > + - Raphael Xu <raphael-xu@xxxxxx> > > description: | > The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier > @@ -23,17 +23,19 @@ properties: > - ti,tas2780 > > reg: > - maxItems: 1 > description: | > - I2C address of the device can be between 0x38 to 0x45. 0x40-0x45 is no longer valid? > + I2C address of the device can be between 0x38 to 0x3f. > + minimum: 0x38 > + maximum: 0x3f > > reset-gpios: > - maxItems: 1 > description: GPIO used to reset the device. > + maxItems: 1 Unnecessary change. > > shutdown-gpios: > + description: | Don't need '|' if no formatting. > + GPIO used to control the state of the device.Only for TAS2764. Space needed after period. > maxItems: 1 > - description: GPIO used to control the state of the device. > > interrupts: > maxItems: 1 > @@ -41,10 +43,14 @@ properties: > ti,imon-slot-no: > $ref: /schemas/types.yaml#/definitions/uint32 > description: TDM TX current sense time slot. > + minimum: 0 > + maximum: 3 > > ti,vmon-slot-no: > $ref: /schemas/types.yaml#/definitions/uint32 > description: TDM TX voltage sense time slot. > + minimum: 0 > + maximum: 3 > > '#sound-dai-cells': > const: 1 > -- > 2.35.1 > > >
