Martin, > > The driver itself won't help you since the old user space tools > > don't know the io box. You wouldn't be able to upload the firmware, > > adjust the mixer levels etc. (unless you patch the old user space > > tools, of course). > I'm sorry, I'm a bit confused here. You said above that "You have > IO, you can adjust the input levels, switch standby and disconnect > the box. So everything works as you would expect it." With the hdsp*-tools that are currently part of the alsa-tools suite, you cannot control the RPM. Neither can you control a lot of the other RME cards. That's going to change with a whole new set of userspace tools. So, if you are curious, I can give you the new driver and a small command line program that enables the RPM io box (which is on bypass mode by default). Or you wait until I finished the new user space tools.. Flo -- Machines can do the work, so people have time to think. public key 6C002249 x-hkp://wwwkeys.eu.pgp.net _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
