On 11/07/2022 20:30, Ryan.Wanner@xxxxxxxxxxxxx wrote: > From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> > > Convert Atmel PDMIC devicetree binding to json-schema. > Change file naming to match json-schema naming. > > Signed-off-by: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> > --- > v1 -> v2: > - Fix title. > - Removed trivial descriptions. > - Fix formatting. > > .../bindings/sound/atmel,sama5d2-pdmic.yaml | 98 +++++++++++++++++++ > .../devicetree/bindings/sound/atmel-pdmic.txt | 55 ----------- > 2 files changed, 98 insertions(+), 55 deletions(-) > create mode 100644 Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml > delete mode 100644 Documentation/devicetree/bindings/sound/atmel-pdmic.txt > > diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml > new file mode 100644 > index 000000000000..88fa92a30147 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Atmel PDMIC decoder > + > +maintainers: > + - Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > + > +description: > + Atmel Pulse Density Modulation Interface Controller > + (PDMIC) peripheral is a mono PDM decoder module > + that decodes an incoming PDM sample stream. > + > +properties: > + compatible: > + const: atmel,sama5d2-pdmic > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: peripheral clock > + - description: generated clock > + > + clock-names: > + items: > + - const: pclk > + - const: gclk > + > + dmas: > + maxItems: 1 > + > + dma-names: > + const: rx > + > + atmel,mic-min-freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + The minimal frequency that the microphone supports. > + > + atmel,mic-max-freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + The maximal frequency that the microphone supports. > + > + atmel,model: > + description: The user-visible name of this sound card. In previous properties the description was the last one, so keep it consistent. > + $ref: /schemas/types.yaml#/definitions/string > + default: PDMIC > + > + atmel,mic-offset: > + $ref: /schemas/types.yaml#/definitions/int32 > + description: The offset that should be added. > + default: 0 > + > +required: > + - compatible > + - reg > + - interrupts > + - dmas > + - dma-names > + - clock-names > + - clocks > + - atmel,mic-min-freq > + - atmel,mic-max-freq > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/dma/at91.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + pdmic: sound@f8018000 { > + compatible = "atmel,sama5d2-pdmic"; Wrong indentation. I already asked for this. Best regards, Krzysztof
