Add two PLL clock source, they are the parent clocks of root clock one is for 8kHz series rates, another one is for 11kHz series rates. They are optional clocks, if there are such clocks, then driver can switch between them for supporting more accurate rates. Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 4c66e6a1a533..fbdefc3fade7 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -21,6 +21,9 @@ Required properties: - clock-names : Must include the "bus" for register access and "mclk1", "mclk2", "mclk3" for bit clock and frame clock providing. + "pll8k", "pll11k" are optional, they are the clock + source for root clock, one is for 8kHz series rates + another one is for 11kHz series rates. - dmas : Generic dma devicetree binding as described in Documentation/devicetree/bindings/dma/dma.txt. -- 2.17.1
