[PATCH 00/49] regmap-irq cleanups and refactoring

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

Here's a bunch of cleanups for regmap-irq focused on simplifying the API
and generalizing it a bit. It's broken up into three refactors, focusing
on one area at a time.

* Patches 01 and 02 are straightforward bugfixes, independent of the
  rest of the series. Neither of the bugs are triggered by in-tree
  drivers but they might be worth picking up early anyhow.

* Patches 03-13 clean up everything related to configuring IRQ types.

* Patches 14-45 deal with mask/unmask registers. First, make unmask
  registers behave more intuitively and usefully, and get rid of the
  mask_invert flag in favor of describing inverted mask registers as
  unmask registers. Second, make the mask_writeonly flag more useful
  and enable it for two chips where it makes sense.

* Patches 46-49 refactor sub_irq_reg() as a get_irq_reg() callback,
  and use that to eliminate the not_fixed_stride flag.

The approach I used when refactoring is pretty simple: (1) introduce new
functionality in regmap-irq, (2) convert the drivers, and (3) remove any
old code. Nothing should break in the middle.

The patches can be re-ordered to some extent if that's preferable, but
it's best to add get_irq_reg() last to avoid having to think about how
it interacts with features that'll be removed anyway.

I can't test most of the devices affected by this series so a lot of the
code is only build tested. I've tested on real hardware with my AXP192
patchset[1], although it only provides limited code coverage.

qcom-pm8008 in particular deserves careful testing - it used all of the
features touched by the refactors and required the most changes. Other
drivers only required trivial changes but there are three of them worth
mentioning: wcd943x, wcd9335, and wcd938x. They have suspicious looking
IRQ type definitions and I'm pretty sure aren't working properly, but
I can't fix them myself. The refactor shouldn't affect their behavior
so how / when / if they get fixed shouldn't be much of an issue.

Oh, and I added the 'mask_writeonly' flag and volatile ranges to the
stpmic1 driver based on its datasheet[2] as a small optimization. It's
probably fine but testing would be a good idea.

[1]: https://lore.kernel.org/linux-iio/20220618214009.2178567-1-aidanmacdonald.0x0@gmailcom/
[2]: https://www.st.com/resource/en/datasheet/stpmic1.pdf

Aidan MacDonald (49):
  regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
  regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
  regmap-irq: Remove an unnecessary restriction on type_in_mask
  regmap-irq: Introduce config registers for irq types
  mfd: qcom-pm8008: Convert irq chip to config regs
  mfd: wcd934x: Convert irq chip to config regs
  sound: soc: codecs: wcd9335: Convert irq chip to config regs
  sound: soc: codecs: wcd938x: Remove spurious type_base from irq chip
  mfd: max77650: Remove useless type_invert flag
  regmap-irq: Remove virtual registers support
  regmap-irq: Remove old type register support, refactor
  regmap-irq: Remove unused type_reg_stride field
  regmap-irq: Remove unused type_invert flag
  regmap-irq: Do not use regmap_irq_update_bits() for wake regs
  regmap-irq: Change the behavior of mask_writeonly
  regmap-irq: Rename regmap_irq_update_bits()
  regmap-irq: Add broken_mask_unmask flag
  mfd: qcom-pm8008: Add broken_mask_unmask irq chip flag
  mfd: stpmic1: Add broken_mask_unmask irq chip flag
  regmap-irq: Fix inverted handling of unmask registers
  mfd: tps65090: replace irqchip mask_invert with unmask_base
  mfd: sun4i-gpadc: replace irqchip mask_invert with unmask_base
  mfd: sprd-sc27xx-spi: replace irqchip mask_invert with unmask_base
  mfd: rt5033: replace irqchip mask_invert with unmask_base
  mfd: rohm-bd71828: replace irqchip mask_invert with unmask_base
  mfd: rn5t618: replace irqchip mask_invert with unmask_base
  mfd: gateworks-gsc: replace irqchip mask_invert with unmask_base
  mfd: axp20x: replace irqchip mask_invert with unmask_base
  mfd: atc260x: replace irqchip mask_invert with unmask_base
  mfd: 88pm800: replace irqchip mask_invert with unmask_base
  mfd: max14577: replace irqchip mask_invert with unmask_base
  mfd: max77693: replace irqchip mask_invert with unmask_base
  mfd: rohm-bd718x7: drop useless mask_invert flag on irqchip
  mfd: max77843: drop useless mask_invert flag on irqchip
  extcon: max77843: replace irqchip mask_invert with unmask_base
  extcon: sm5502: drop useless mask_invert flag on irqchip
  extcon: rt8973a: drop useless mask_invert flag on irqchip
  irqchip: sl28cpld: replace irqchip mask_invert with unmask_base
  gpio: sl28cpld: replace irqchip mask_invert with unmask_base
  mfd: stpmic1: Fix broken mask/unmask in irq chip
  mfd: stpmic1: Enable mask_writeonly flag for irq chip
  mfd: qcom-pm8008: Fix broken mask/unmask in irq chip
  mfd: qcom-pm8008: Enable mask_writeonly flag for irq chip
  regmap-irq: Remove broken_mask_unmask flag
  regmap-irq: Remove mask_invert flag
  regmap-irq: Refactor checks for status bulk read support
  regmap-irq: Add get_irq_reg() callback
  mfd: qcom-pm8008: Use get_irq_reg() for irq chip
  regmap-irq: Remove not_fixed_stride flag

 drivers/base/regmap/regmap-irq.c | 457 ++++++++++++++-----------------
 drivers/extcon/extcon-max77843.c |   3 +-
 drivers/extcon/extcon-rt8973a.c  |   1 -
 drivers/extcon/extcon-sm5502.c   |   2 -
 drivers/gpio/gpio-sl28cpld.c     |   3 +-
 drivers/irqchip/irq-sl28cpld.c   |   3 +-
 drivers/mfd/88pm800.c            |   3 +-
 drivers/mfd/atc260x-core.c       |   6 +-
 drivers/mfd/axp20x.c             |  21 +-
 drivers/mfd/gateworks-gsc.c      |   3 +-
 drivers/mfd/max14577.c           |   7 +-
 drivers/mfd/max77650.c           |   1 -
 drivers/mfd/max77693.c           |   6 +-
 drivers/mfd/max77843.c           |   1 -
 drivers/mfd/qcom-pm8008.c        | 131 ++++-----
 drivers/mfd/rn5t618.c            |   3 +-
 drivers/mfd/rohm-bd71828.c       |   6 +-
 drivers/mfd/rohm-bd718x7.c       |   1 -
 drivers/mfd/rt5033.c             |   3 +-
 drivers/mfd/sprd-sc27xx-spi.c    |   3 +-
 drivers/mfd/stpmic1.c            |   7 +-
 drivers/mfd/sun4i-gpadc.c        |   3 +-
 drivers/mfd/tps65090.c           |   3 +-
 drivers/mfd/wcd934x.c            |  11 +-
 include/linux/regmap.h           |  59 ++--
 sound/soc/codecs/wcd9335.c       |  10 +-
 sound/soc/codecs/wcd938x.c       |   1 -
 27 files changed, 332 insertions(+), 426 deletions(-)

-- 
2.35.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux