The resource info need to be accessed by hw_params()
function for multi fifo case, the start address may
be not the FIFO0. So move it to be a member of
struct fsl_sai.
Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
sound/soc/fsl/fsl_sai.c | 7 +++----
sound/soc/fsl/fsl_sai.h | 1 +
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index ddfe28cb7df0..86aa0baba848 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -1077,7 +1077,6 @@ static int fsl_sai_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct fsl_sai *sai;
struct regmap *gpr;
- struct resource *res;
void __iomem *base;
char tmp[8];
int irq, ret, i;
@@ -1092,7 +1091,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
- base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, &sai->res);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -1192,8 +1191,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
MCLK_DIR(index));
}
- sai->dma_params_rx.addr = res->start + FSL_SAI_RDR0;
- sai->dma_params_tx.addr = res->start + FSL_SAI_TDR0;
+ sai->dma_params_rx.addr = sai->res->start + FSL_SAI_RDR0;
+ sai->dma_params_tx.addr = sai->res->start + FSL_SAI_TDR0;
sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index c0b6bc42fc3c..4d657edc9c9f 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -258,6 +258,7 @@ struct fsl_sai {
struct regmap *regmap;
struct clk *bus_clk;
struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
+ struct resource *res;
bool is_consumer_mode;
bool is_lsb_first;
--
2.17.1
