The card did not map jack pins to controls, which prevents
PulseAudio/PipeWire from dealing with jack detection. It's likely that
jack detection was only tested with the CRAS server and extensions of
UCM.
Suggested-by: Jaroslav Kysela <perex@xxxxxxxx>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx>
Reviewed-by: Bard Liao <yung-chuan.liao@xxxxxxxxxxxxxxx>
---
sound/soc/intel/boards/sof_rt5682.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index f28dae64587e1..a24fb71d5ff3a 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -248,6 +248,17 @@ static int sof_hdmi_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
+static struct snd_soc_jack_pin jack_pins[] = {
+ {
+ .pin = "Headphone Jack",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
{
struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
@@ -295,11 +306,13 @@ static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
* Headset buttons map to the google Reference headset.
* These can be configured by userspace.
*/
- ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
- SND_JACK_HEADSET | SND_JACK_BTN_0 |
- SND_JACK_BTN_1 | SND_JACK_BTN_2 |
- SND_JACK_BTN_3,
- &ctx->sof_headset);
+ ret = snd_soc_card_jack_new_pins(rtd->card, "Headset Jack",
+ SND_JACK_HEADSET | SND_JACK_BTN_0 |
+ SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+ SND_JACK_BTN_3,
+ &ctx->sof_headset,
+ jack_pins,
+ ARRAY_SIZE(jack_pins));
if (ret) {
dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret);
return ret;
--
2.34.1
