After finishing the playback or recording, the machine driver might
call snd_soc_dai_set_pll(codec, pll_id, 0, 0, 0) to stop the internal
PLL, but with the codec driver nau8822, it will print error as below:
nau8822 0-001a: Unsupported input clock 0
fsl-asoc-card sound-nau8822: failed to stop FLL: -22
Refer to the function wm8962_set_fll() in the codec driver wm8962, if
the freq_out is zero, turn off the internal PLL and return 0.
Cc: David Lin <ctlin0@xxxxxxxxxxx>
Cc: John Hsu <kchsu0@xxxxxxxxxxx>
Cc: Seven Li <wtli@xxxxxxxxxxx>
Signed-off-by: Hui Wang <hui.wang@xxxxxxxxxxxxx>
---
sound/soc/codecs/nau8822.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c
index b436e532993d..4d3720c69f91 100644
--- a/sound/soc/codecs/nau8822.c
+++ b/sound/soc/codecs/nau8822.c
@@ -726,6 +726,13 @@ static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
struct nau8822_pll *pll_param = &nau8822->pll;
int ret, fs;
+ if (freq_out == 0) {
+ dev_dbg(component->dev, "PLL disabled\n");
+ snd_soc_component_update_bits(component,
+ NAU8822_REG_POWER_MANAGEMENT_1, NAU8822_PLL_EN_MASK, NAU8822_PLL_OFF);
+ return 0;
+ }
+
fs = freq_out / 256;
ret = nau8822_calc_pll(freq_in, fs, pll_param);
--
2.25.1
