Enabling fsl_sai MCLK before codec probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



So I have a tricky race condition that comes up with hardware that
combines imx8 with a pcm1681 codec. The pcm1681 requires that MCLK be
enabled for 65536 cycles before accessing the I2C management port.

The imx8 sai driver on the other hand does not start the built in MCLK
until a confluence of events that is not triggered until just before
streaming starts which is too late.

Is there a clean way to start the imx8 sai MCLK before the codec probe occurs?
Or have it started and delayed during the codec probe before it tries
to access i2c?

We have a working solution but it is a bit overreaching and adds a
callback function to the snd_soc_dai_ops struct to start the clock,
and adds the code to the fsl_sai.c to toggle the appropriate bits in
the SoC sai driver to make a clock appear and registers to the new
function callback.

Then the simple-card was amended to add the appropriate enabling
through the new callback such that the clock is on long enough before
the codec is probed.

There was some suggestion of caching the i2c registers until the clock
is enabled but this would be difficult given the clock is not started
until streaming starts and we don't want to stream until the codec is
initialized.

I am looking for a solution that is minimal and robust.

Any pointers would be greatly appreciated.



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux