From: Craig McLure <craig@xxxxxxxxxx> Devices such as the TC-Helicon GoXLR require the sync endpoint to be configured in advance of the data endpoint in order for sound output to work. This patch simply changes the ordering of EP configuration to resolve this. Fixes: bf6313a0ff76 ("ALSA: usb-audio: Refactor endpoint management") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215079 Signed-off-by: Craig McLure <craig@xxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> --- sound/usb/pcm.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 6d699065e81a..b470404a5376 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -439,16 +439,21 @@ static int configure_endpoints(struct snd_usb_audio *chip, /* stop any running stream beforehand */ if (stop_endpoints(subs, false)) sync_pending_stops(subs); + if (subs->sync_endpoint) { + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); + if (err < 0) + return err; + } err = snd_usb_endpoint_configure(chip, subs->data_endpoint); if (err < 0) return err; snd_usb_set_format_quirk(subs, subs->cur_audiofmt); - } - - if (subs->sync_endpoint) { - err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); - if (err < 0) - return err; + } else { + if (subs->sync_endpoint) { + err = snd_usb_endpoint_configure(chip, subs->sync_endpoint); + if (err < 0) + return err; + } } return 0; -- 2.35.3