We have an imx6sx EVB with the codec nau8822, when playing the audio with 48k sample rate, the audio sounds distorted and obviously faster than expected. The codec input MCLK is 24000000Hz on our board, if the target sample rate is 48000Hz, with the current algorithm, the computed prescalar will result in 62500Hz, with the patched algorithm, the sample rate will be 46875Hz which is nearer the target sample rate. And for other sample rate like 44100, 22050, 11025 or 8000, the patched algorithm has no difference with the current algorithm, they will generate the same prescalar and the same sample rate. Signed-off-by: Hui Wang <hui.wang@xxxxxxxxxxxxx> --- sound/soc/codecs/nau8822.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c index 66bbd8f4f1ad..b67fdf64ddab 100644 --- a/sound/soc/codecs/nau8822.c +++ b/sound/soc/codecs/nau8822.c @@ -668,21 +668,24 @@ static int nau8822_config_clkdiv(struct snd_soc_dai *dai, int div, int rate) struct snd_soc_component *component = dai->component; struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); struct nau8822_pll *pll = &nau8822->pll; + int diff = INT_MAX; int i, sclk, imclk; switch (nau8822->div_id) { case NAU8822_CLK_MCLK: /* Configure the master clock prescaler div to make system * clock to approximate the internal master clock (IMCLK); - * and large or equal to IMCLK. + * and find the nearest value to IMCLK. */ div = 0; imclk = rate * 256; for (i = 1; i < ARRAY_SIZE(nau8822_mclk_scaler); i++) { sclk = (nau8822->sysclk * 10) / nau8822_mclk_scaler[i]; - if (sclk < imclk) + if (abs(sclk - imclk) < diff) { + diff = abs(sclk - imclk); + div = i; + } else break; - div = i; } dev_dbg(component->dev, "master clock prescaler %x for fs %d\n", div, rate); -- 2.25.1