Somebody in the thread at some point said: > At Tue, 06 May 2008 12:00:59 +0100, > Andy Green wrote: >> Somebody in the thread at some point said: >> >> Hi - >> >>> Is this above with model=acer-aspire *and* your additional verb? >>> Or, is it without model option? >> I tried it with model=acer (same as no forcing) and acer-aspire, I was >> able to play 2-channel PCM sounds OK only with the extra verb either >> way. I got more controls in alsamixer with just "acer" (like low >> frequency channel), but they didn't seem to do anything useful. >> >>> I found that one initialization is missing for auto-configuration mode >>> of ALC889. Please try the patch below and remove model=xxx option. >> OK I will test this patch later today with no model forcing. > > Did you get any positive/negative result? Sorry Takashi, I did try both patches but neither seemed to work. I didn't get any time since then to confirm it wasn't something dumb on my side. After failing to see anything from the recompile / re-install and modprobing snd-hda-intel out and back in, running hda-verb as described did continue to bring the audio right up. I should check that the mixer VID/PID actually is ...889 on this machine. -Andy _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
