From: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.
Signed-off-by: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Vitaly Rodionov <vitalyr@xxxxxxxxxxxxxxxxxxxxx>
---
sound/pci/hda/cs35l41_hda.c | 57 +++++++++++++++++++++++++++++++++++++
sound/pci/hda/cs35l41_hda.h | 15 ++++++++++
2 files changed, 72 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 9c622104bf01..7e87b355b369 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -22,10 +22,18 @@
#define CS35L41_FIRMWARE_ROOT "cirrus/"
#define CS35L41_PART "cs35l41"
#define FW_NAME "CSPL"
+#define CIRRUS_EFI_GUID \
+ EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3)
#define HALO_STATE_DSP_CTL_NAME "HALO_STATE"
#define HALO_STATE_DSP_CTL_TYPE 5
#define HALO_STATE_DSP_CTL_ALG 262308
+#define CAL_R_DSP_CTL_NAME "CAL_R"
+#define CAL_R_DSP_CTL_TYPE 5
+#define CAL_R_DSP_CTL_ALG 205
+
+static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
+static efi_guid_t efi_guid = CIRRUS_EFI_GUID;
static const struct reg_sequence cs35l41_hda_config[] = {
{ CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
@@ -282,6 +290,50 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
return ret;
}
+static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41)
+{
+ const struct cs35l41_amp_efi_data *efi_data;
+ const struct cs35l41_amp_cal_data *cl;
+ unsigned long data_size = 0;
+ efi_status_t status;
+ int ret = 0;
+ u8 *data = NULL;
+ u32 attr;
+ u32 r0;
+
+ /* Get real size of UEFI variable */
+ status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+ if (status == EFI_BUFFER_TOO_SMALL) {
+ ret = -ENODEV;
+ /* Allocate data buffer of data_size bytes */
+ data = vmalloc(data_size);
+ if (!data)
+ return -ENOMEM;
+ /* Get variable contents into buffer */
+ status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
+ if (status == EFI_SUCCESS) {
+ efi_data = (struct cs35l41_amp_efi_data *)data;
+ dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
+ efi_data->size, efi_data->count);
+ if (efi_data->count > cs35l41->index) {
+ cl = &efi_data->data[cs35l41->index];
+ dev_dbg(cs35l41->dev,
+ "Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
+ cl->calAmbient, cl->calStatus, cl->calR);
+ r0 = cpu_to_be32(cl->calR);
+ ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME,
+ CAL_R_DSP_CTL_TYPE, CAL_R_DSP_CTL_ALG,
+ &r0, 4);
+ if (ret)
+ dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n",
+ CAL_R_DSP_CTL_NAME, ret);
+ }
+ }
+ vfree(data);
+ }
+ return ret;
+}
+
static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
{
const struct firmware *coeff_firmware = NULL;
@@ -314,7 +366,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
FW_NAME);
+ if (ret)
+ goto err_release;
+
+ ret = cs35l41_apply_calibration(cs35l41);
+err_release:
if (wmfw_firmware)
release_firmware(wmfw_firmware);
if (coeff_firmware)
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index 54521a013e78..3cf9871fbed2 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -10,6 +10,7 @@
#ifndef __CS35L41_HDA_H__
#define __CS35L41_HDA_H__
+#include <linux/efi.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
#include <linux/device.h>
@@ -18,6 +19,20 @@
#include <linux/firmware/cirrus/cs_dsp.h>
#include <linux/firmware/cirrus/wmfw.h>
+struct cs35l41_amp_cal_data {
+ u32 calTarget[2];
+ u32 calTime[2];
+ s8 calAmbient;
+ u8 calStatus;
+ u16 calR;
+} __packed;
+
+struct cs35l41_amp_efi_data {
+ u32 size;
+ u32 count;
+ struct cs35l41_amp_cal_data data[];
+} __packed;
+
enum cs35l41_hda_spk_pos {
CS35l41_LEFT,
CS35l41_RIGHT,
--
2.34.1
