Il 05/05/22 10:48, Jiaxin Yu ha scritto:
On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
bus
between two busses. Add a pattern for these properties in the
dt-binding.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
+++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
pcm.yaml
index 7a25bc9b8060..5b03c8dbf318 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -54,6 +54,11 @@ properties:
- const: aud_infra_clk
- const: aud_infra_26m_clk
+patternProperties:
+ "^i2s[0-35-9]-share$":
+ description: Name of the I2S bus that is shared with this bus
+ pattern: "^I2S[0-35-9]$"
+
required:
- compatible
- interrupts
The only other way of doing this would be to complicate this in the
driver
so that we can do something like
"i2s-share = <0 2>"; instead of i2s0-share = "I2S2";
...and I don't think that this would be any more straightforward than
the
provided way.
There's an improvement that we can do to that pattern description
though,
which would be explaining that declaring 'i2s0-share = "I2S2"' means
that
I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
Another thing that comes to mind here is that this is a MediaTek
specific
property and *not* a generic one, which means that both the driver
and
this binding should be fixed to get a "mediatek," prefix, so, this
property
should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
I think that everyone agrees about that, but let's see what the
others say.
Cheers,
Angelo
Hi Angelo,
'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
Even numbers represent input, odd numbers represent output.
Yes, I think adding the "mediatek," prefix is the right way to define a
non-generic property.
Hello Jiaxin,
if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
just explained, i2sX, where:
X = even number -> always DATA IN
X = odd number -> always DATA OUT
...this means that the dt-binding needs a pattern to specify that only odd
can be assigned to only even.
Nicolas, take note! :-) :-)
Thanks,
Angelo
