The endianness flag is used on the CODEC side to specify an ambivalence to endian, typically because it is lost over the hardware link. The i2s_rx component receives audio over an I2S DAI and as such should have endianness applied. A fixup is also required to use the width directly rather than relying on the format in hw_params, now both little and big endian would be supported. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/cros_ec_codec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c index 9b92e1a0d1a3a..8b0a9c788a264 100644 --- a/sound/soc/codecs/cros_ec_codec.c +++ b/sound/soc/codecs/cros_ec_codec.c @@ -232,11 +232,11 @@ static int i2s_rx_hw_params(struct snd_pcm_substream *substream, if (params_rate(params) != 48000) return -EINVAL; - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: + switch (params_width(params)) { + case 16: depth = EC_CODEC_I2S_RX_SAMPLE_DEPTH_16; break; - case SNDRV_PCM_FORMAT_S24_LE: + case 24: depth = EC_CODEC_I2S_RX_SAMPLE_DEPTH_24; break; default: @@ -387,6 +387,7 @@ static const struct snd_soc_component_driver i2s_rx_component_driver = { .num_dapm_widgets = ARRAY_SIZE(i2s_rx_dapm_widgets), .dapm_routes = i2s_rx_dapm_routes, .num_dapm_routes = ARRAY_SIZE(i2s_rx_dapm_routes), + .endianness = 1, }; static void *wov_map_shm(struct cros_ec_codec_priv *priv, -- 2.30.2