> At Fri, 9 May 2008 15:35:50 +0200,>> Björn van der Meer wrote:> > > At Mon, 5 May 2008 08:43:16 +0200,> > >> > > Björn van der Meer wrote:> > > > Hello Everyone,> > > >> > > > I have above component in my laptop and lack the expertise to add it> > > > to to patch_realtek.c myself.> > > >> > > > I think I have collected all the relevant information if one of the> > > > developers wants to give it a try.> > > >> > > > My Notebook: Medion 98300 (a.k.a. WAM2030)> > > > (Please note: Medion is not an OEM. The board is nVidia based, OEM> > > > thought to be Wistron. Apparently rarely used sound component?)> > > >> > > > Internal speakers> > > > Internal mic - unknown> > > > three jacks: headphone, mic, SPDIF(dual use jack).> > > > Jack Sensing under Windows.> > > > 5.1 surround (sounds like the setup should be supported by> > > > 3stack-6ch-dig)> > > >> > > > lspci:> > > > 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition> > > > Audio [10de:026c] (rev a2)> > > > Subsystem: Wistron Corp. Unknown device [17c0:4079]> > > > Flags: 66MHz, fast devsel, IRQ 20> > > > Memory at c0000000 (32-bit, non-prefetchable) [size=16K]> > > > Capabilities: [44] Power Management version 2> > > > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+> > > > Queue=0/0 Enable-> > > > Capabilities: [6c] HyperTransport: MSI Mapping> > > >> > > > hwinfo:> > > > 22: PCI 10.1: 0403 Audio device> > > > [Created at pci.296]> > > > UDI: /org/freedesktop/Hal/devices/pci_10de_26c> > > > Unique ID: wRyD.X7XJ3rTjrR3> > > > SysFS ID: /devices/pci0000:00/0000:00:10.1> > > > SysFS BusID: 0000:00:10.1> > > > Hardware Class: sound> > > > Model: "Wistron MCP51 High Definition Audio"> > > > Vendor: pci 0x10de "nVidia Corporation"> > > > Device: pci 0x026c "MCP51 High Definition Audio"> > > > SubVendor: pci 0x17c0 "Wistron Corp."> > > > SubDevice: pci 0x4079> > > > Revision: 0xa2> > > > Driver: "HDA Intel"> > > > Driver Modules: "snd_hda_intel"> > > > Memory Range: 0xc0000000-0xc0003fff (rw,non-prefetchable)> > > > IRQ: 20 (195693 events)> > > > Module Alias:> > > > "pci:v000010DEd0000026Csv000017C0sd00004079bc04sc03i00" Driver Info> > > > #0:> > > > Driver Status: snd_hda_intel is active> > > > Driver Activation Cmd: "modprobe snd_hda_intel"> > > > Config Status: cfg=new, avail=yes, need=no, active=unknown> > > >> > > > alsa-info.sh output is at http://pastebin.com/f49962c92.> > > >> > > >> > > >> > > > Currently the only thing working is output via the internal speakers.> > >> > > And doesn't this still work with the latest ALSA HG driver?> > >> > >> > > Takashi> >> > Thanks for your answer. Latest HG does not compile on my system, throws> > memalloc.c errors. (Could be me doing something wrong though - out on a> > limp)> >> > CC [M] /home/bvdm/alsa-driver/acore/memalloc.o> > /home/bvdm/alsa-driver/acore/memalloc.c: In function ‘snd_mem_init’:> > /home/bvdm/alsa-driver/acore/memalloc.c:729: error: implicit declaration> > of function ‘proc_create’> > /home/bvdm/alsa-driver/acore/memalloc.c:730: warning: assignment makes> > pointer from integer without a cast> > make[3]: *** [/home/bvdm/alsa-driver/acore/memalloc.o] Error 1> > make[2]: *** [/home/bvdm/alsa-driver/acore] Error 2> > make[1]: *** [_module_/home/bvdm/alsa-driver] Error 2> > make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-16-generic'> >> >> >> > I see references to similar errors on the list, had to do with processor> > identification?> >> >> > Configure detects this:> > checking for processor type... i586> > checking for i386 machine type... default> >> > /proc/cpuinfo starts with:> > [...]> > vendor_id : AuthenticAMD> > cpu family : 15> > model : 72> > model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50> > [...]>> It's a problem in alsa-driver build stub. I fixed it right now on HG> tree.>> > I have also just lifted patch_realtek.c from the current hg and compiled> > it in a working tarball (actually labelled alsa-driver-hg20080502.tar > > from the realtek site), which compiles, looks a bit better.> > Gives me:> > - Different set of mixer controls (not 5.1 though)>> OK, I'll need a newer alsa-info.sh with the latest driver. New alsa-info.sh is at http://pastebin.ca/1012744 >> > - headphone output in the strange dual-use SPDIF jack only (headphone> > jack only goes 2/3 of the way in)>> Please elaborate? I don't understand your description. hehe, yes. I didn't believe it either. This laptop has three jacks. - light blue, symbol "headphone", normal 3.5mm jack - pink, symbol "microphone", normal 3.5mm jack - black, symbol line out, normal 3.5mm (that only goes in 2/3 of the way) jack AND SPDIF (yes, now glowing red) Actually. Seeing is believing. www.chronovault.net/static/medion98300jacks.jpg > > - but with jack-sensing working in that jack, with the boxes turning off> > when I insert the headphone into the SPDIF.> This sounds good -- do you mean that you have another headphone jacks?>>> Takashi Thank you very much Just hg'ed again compile runs fine. This is without any "options snd-hda-intel model=XXXX" line in /etc/modprobe.d/alsa-base - I now put my headphone into the black jack and get sound, boxes turn off. - light blue jack is without function now. - mixer option "headphone" is without function. - mixer now has master, headphone,pcm,front,frontmic,line,mic,micboost,digital - only master,pcm and front work, all regulate master volume on SPDIF-used-as-headphone-jack and the internal boxes- dont have a mic right here to try out Should I try options there now? Is /etc/init.d/alsasound stop / start a good way to cycle through options? -- Björn van der Meerbvdm@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx mailing listAlsa-devel@xxxxxxxxxxxxxxxxxxxx://mailman.alsa-project.org/mailman/listinfo/alsa-devel
