The previous fix for event generation for custom controls compared the value already in the register with the value being written, missing the logic that only applies the value to the register when the control is already enabled. Fix this, compare the value cached in the driver data rather than the register. This should really be an autodisable control rather than open coded. Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- sound/soc/codecs/max98090.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 5146837c0fce..48dcf071bb5a 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -396,6 +396,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol, unsigned int sel = ucontrol->value.integer.value[0]; unsigned int val = snd_soc_component_read(component, mc->reg); unsigned int *select; + int change; switch (mc->reg) { case M98090_REG_MIC1_INPUT_LEVEL: @@ -416,6 +417,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol, if (sel < 0 || sel > mc->max) return -EINVAL; + change = *select != sel; *select = sel; /* Setting a volume is only valid if it is already On */ @@ -430,7 +432,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol, mask << mc->shift, sel << mc->shift); - return *select != val; + return change; } static const char *max98090_perf_pwr_text[] = -- 2.30.2