From: Ryan Lee <ryans.lee@xxxxxxxxxx> This patch adds dt-bindings information for Analog Devices MAX98396 and MAX98397 Smart Amplifier. Signed-off-by: Ryan Lee <ryans.lee@xxxxxxxxxx> --- .../bindings/sound/adi,max98396.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,max98396.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml new file mode 100644 index 000000000000..4aee32f43ad1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,max98396.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX98396 Speaker Amplifier Device Tree Bindings + +maintainers: + - Ryan Lee <ryans.lee@xxxxxxxxxx> + +description: + The MAX98396 is a mono Class-DG speaker amplifier with I/V sense. + The device provides a PCM interface for audio data and a standard + I2C interface for control data communication. + The MAX98397 is a variant of MAX98396 with wide input supply range. + +properties: + compatible: + enum: + - adi,max98396 + - adi,max98397 + reg: + maxItems: 1 + description: I2C address of the device. + + adi,vmon-slot-no: + description: slot number of the voltage sense monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,imon-slot-no: + description: slot number of the current sense monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,spkfb-slot-no: + description: slot number of speaker DSP monitor + minimum: 0 + maximum: 15 + default: 0 + + adi,interleave-mode: + type: boolean + description: For cases where a single combined channel for the I/V sense data is not sufficient, + the device can also be configured to share a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame interleaved on a single output channel. + default: false + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98396: amplifier@39 { + compatible = "adi,max98396"; + reg = <0x39>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode = <0>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + max98397: amplifier@3c { + compatible = "adi,max98397"; + reg = <0x3c>; + adi,vmon-slot-no = <0>; + adi,imon-slot-no = <1>; + adi,interleave-mode = <0>; + reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; + -- 2.25.1
