On Thursday 24 April 2008 16:30, Liam Girdwood wrote: > On Thu, 2008-04-24 at 16:11 +0200, Juergen Beisert wrote: > > On Wednesday 23 April 2008 17:36, Liam Girdwood wrote: > > > On Wed, 2008-04-23 at 16:54 +0200, Juergen Beisert wrote: > > > > Hi, > > > > > > > > I'm going to adapt Freescale's i.MX27 CPU to the SoC sound support > > > > via I2S. I found the imx21 already in the repository (may it will > > > > help for my job). Is anybody else working on i.MX27 support (to avoid > > > > to reinvention everything)? > > > > > > It's not fully supported atm. However I've had interest from a few > > > folks who are interested in completing support. > > > > > > Currently working :- > > > [...] > > > > Working in what tree? In the git repository I did not found a "struct > > dma_channel_params" for imx. I'm confused. > > http://opensource.wolfsonmicro.com/cgi-bin/gitweb.cgi?p=linux-2.6-asoc.git; >a=summary > > (dev branch) > > It's currently based on the 2.6.22 Freescale kernel (i.e. arch/arm/mxc) > from their i.MX31ADS board's BSP. > > Fwiw, I will be updating stuff as more i.MX code goes upstream, it's > just a matter of time. Hmm, I did a deeper look into this code. Why - for example - does the file mx31ads-wm8753.c does the job of the BSP file? Why it registers devices? For my board I want to register platform_devices only in arc/arm/mach-mx2/pcm038.c. Nowhere else. If there is some glue required to bring components together, IMHO also arc/arm/mach-mx2/pcm038.c is the correct place to do so. Why you did it in sound/ ? If you do it in sound/ , you always need two locations to maintain. On in the arch/, one in sound/ . Juergen -- Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Vertretung Sued/Muenchen, Germany Phone: +49-8766-939 228 | Fax: +49-5121-206917-9 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
