The dai configuration is always the same and should always configured during the opening the stream. Signed-off-by: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx> --- sound/pci/hda/cs35l41_hda.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c index d2addae8c085..f853530eb385 100644 --- a/sound/pci/hda/cs35l41_hda.c +++ b/sound/pci/hda/cs35l41_hda.c @@ -111,8 +111,6 @@ static const struct reg_sequence cs35l41_reset_to_safe[] = { static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = { .probe = cs35l41_reset_to_safe, .num_probe = ARRAY_SIZE(cs35l41_reset_to_safe), - .open = cs35l41_hda_config, - .num_open = ARRAY_SIZE(cs35l41_hda_config), .prepare = cs35l41_safe_to_active, .num_prepare = ARRAY_SIZE(cs35l41_safe_to_active), .cleanup = cs35l41_active_to_safe, @@ -120,8 +118,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = { }; static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = { - .open = cs35l41_hda_config, - .num_open = ARRAY_SIZE(cs35l41_hda_config), .prepare = cs35l41_start_ext_vspk, .num_prepare = ARRAY_SIZE(cs35l41_start_ext_vspk), .cleanup = cs35l41_stop_ext_vspk, @@ -129,8 +125,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = { }; static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_int_bst = { - .open = cs35l41_hda_config, - .num_open = ARRAY_SIZE(cs35l41_hda_config), .prepare = cs35l41_hda_start_bst, .num_prepare = ARRAY_SIZE(cs35l41_hda_start_bst), .cleanup = cs35l41_hda_stop_bst, @@ -146,8 +140,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action) switch (action) { case HDA_GEN_PCM_ACT_OPEN: - if (reg_seq->open) - ret = regmap_multi_reg_write(reg, reg_seq->open, reg_seq->num_open); + ret = regmap_multi_reg_write(reg, cs35l41_hda_config, + ARRAY_SIZE(cs35l41_hda_config)); break; case HDA_GEN_PCM_ACT_PREPARE: if (reg_seq->prepare) -- 2.35.2