On Thu, Apr 17, 2008 at 12:11:42PM +0200, Takashi Iwai wrote:
> > At Mon, 14 Apr 2008 23:17:47 -0500,
> > John R. wrote:
>> > >
>> > > Sound doesn't work on my bt878 based card. Let me know what other
>> > > information is needed...
> >
> > Please elaborate what "sound doesn't work" means?
Looks like I don't fully understand how it is not working. I could be
pretty far off base with what I am trying...
amixer settings for each of the 4 devices that comes up:
amixer -c1
Simple mixer control 'FM',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Mic/Line',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume
Capture channels: Mono
Limits: Capture 0 - 15
Mono: Capture 15 [100%]
Simple mixer control 'Capture Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'TV Tuner',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Recording doesn't generate an error (not sure about device to use):
arecord -D hw:2,1 -f S16_LE -t wav test.wav
Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
Warning: rate is not accurate (requested = 8000Hz, got = 119466Hz)
please, try the plug plugin
However, there is silience in the resultant wav file.
if possible, let me know what direction I should go in to debug this
further.
Thanks,
John
> >
>> > >
>> > > kernel 2.6.24.2:
>> > >
>> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460
>> > > Apr 14 20:28:38 server kernel: please mail id, board name, and,
if it
>> > > works, the correct digital_rate option to
<alsa-devel@xxxxxxxxxxxxxxxx>
>> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt
0000:05:00.1[A] ->
>> > > GSI 18 (level, low) -> IRQ 18
>> > > Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog,
digital
>> > > (rate 32000 Hz)
>> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461
>> > > Apr 14 20:28:38 server kernel: please mail id, board name, and,
if it
>> > > works, the correct digital_rate option to
<alsa-devel@xxxxxxxxxxxxxxxx>
>> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt
0000:05:01.1[A] ->
>> > > GSI 19 (level, low) -> IRQ 19
>> > > Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog,
digital
>> > > (rate 32000 Hz)
>> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462
>> > > Apr 14 20:28:38 server kernel: please mail id, board name, and,
if it
>> > > works, the correct digital_rate option to
<alsa-devel@xxxxxxxxxxxxxxxx>
>> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt
0000:05:02.1[A] ->
>> > > GSI 16 (level, low) -> IRQ 16
>> > > Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog,
digital
>> > > (rate 3200
>> > > 0 Hz)
>> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463
>> > > Apr 14 20:28:38 server kernel: please mail id, board name, and,
if it
>> > > works, the correct digital_rate option to
<alsa-devel@xxxxxxxxxxxxxxxx>
>> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt
0000:05:03.1[A] ->
>> > > GSI 17 (level, low) -> IRQ 17
>> > > Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog,
digital
>> > > (rate 32000 Hz)
>> > >
>> > > lspci:
>> > >
>> > > 05:00.0 Multimedia video controller: Brooktree Corporation Bt878
Video
>> > > Capture (rev 11)
>> > > 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture
>> > > (rev 11)
>> > > 05:01.0 Multimedia video controller: Brooktree Corporation Bt878
Video
>> > > Capture (rev 11)
>> > > 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture
>> > > (rev 11)
>> > > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878
Video
>> > > Capture (rev 11)
>> > > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture
>> > > (rev 11)
>> > > 05:03.0 Multimedia video controller: Brooktree Corporation Bt878
Video
>> > > Capture (rev 11)
>> > > 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture
>> > > (rev 11)
>> > >
>> > > at boot:
>> > >
>> > > bttv: driver version 0.9.17 loaded
>> > > bttv: using 8 buffers with 2080k (520 pages) each for capture
>> > > bttv: Bt8xx card found (0).
>> > > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>> > > bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio:
>> > > 0xdfcfe000
>> > > bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID
is aa00:1460
>> > > bttv0: using: ProVideo PV150 [card=98,autodetected]
>> > > bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
>> > > bttv0: tuner absent
>> > > bttv0: registered device video0
>> > > bttv0: registered device vbi0
>> > > bttv0: PLL: 28636363 => 35468950 .. ok
>> > > bttv: Bt8xx card found (1).
>> > > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>> > > bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio:
>> > > 0xdfcfc000
>> > > bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID
is aa01:1461
>> > > bttv1: using: ProVideo PV150 [card=98,autodetected]
>> > > bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
>> > > bttv1: tuner absent
>> > > bttv1: registered device video1
>> > > bttv1: registered device vbi1
>> > > bttv1: PLL: 28636363 => 35468950 .. ok
>> > > bttv: Bt8xx card found (2).
>> > > ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>> > > bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio:
>> > > 0xdfcfa000
>> > > bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID
is aa02:1462
>> > > bttv2: using: ProVideo PV150 [card=98,autodetected]
>> > > bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
>> > > bttv2: tuner absent
>> > > bttv2: registered device video2
>> > > bttv2: registered device vbi2
>> > > bttv2: PLL: 28636363 => 35468950 .. ok
>> > > bttv: Bt8xx card found (3).
>> > > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17
>> > > bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio:
>> > > 0xdfcf8000
>> > > bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID
is aa03:1463
>> > > bttv3: using: ProVideo PV150 [card=98,autodetected]
>> > > bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
>> > > bttv3: tuner absent
>> > > bttv3: registered device video3
>> > > bttv3: registered device vbi3
>> > > bttv3: PLL: 28636363 => 35468950 .. ok
>> > >
>> > >
>> > > _______________________________________________
>> > > Alsa-devel mailing list
>> > > Alsa-devel@xxxxxxxxxxxxxxxx
>> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>> > >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@xxxxxxxxxxxxxxxx
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
