Hi Takashi, Steven, et al, My apologies for not getting back to you earlier. I applied the short patch to the hg-20080502 snapshot. That seems to have done the trick. All of the different analog output channels are now available, as well as a bunch of input channels. I only tested output, but that seemed to work. I will hopefully be able to test the inputs this weekend. Given the discussion that I saw, it looks like I won't bother with the digital output. Thanks very much for your help on this. -Greg On Tue, Apr 29, 2008 at 9:47 AM, Takashi Iwai <tiwai@xxxxxxx> wrote: > At Tue, 29 Apr 2008 17:48:53 +0200, > I wrote: > > > > At Sun, 27 Apr 2008 01:38:19 -0500, > > Greg Zornetzer wrote: > > > > > > Hi all, > > > I recently acquired an ECS GF7100PVT-M3 motherboard, which appears to > use > > > the IDT 92HD206 codec for HDA. Unfortunately, it doesn't appear to > have > > > full support under ALSA. It gets detected as another Sigmatel chip. > Analog > > > stereo output appears to work, but the mixer doesn't find any of the > normal > > > inputs. > > > > > > I found the tech specs for the chip at > > > http://www.idt.com/products/getDoc.cfm?docID=13461840 > > > I've attached an lspci output and the codec file to this email. I'm > not > > > much of an driver hacker, but if someone could give me an idea of what > needs > > > to go into the patch_sigmatel.c file to make this thing work, I'd be > willing > > > to try. I'm also more than willing to test out patches on my setup. > > > > The below is an entirely untested patch quickly made from the codec > > information you posted. Could you give it a try with the latest ALSA > > HG version? > > Steven informed that this codec is compatible with STAC927x. > So the revised patch below is dramatically shorter. Try this one > instead of the previous one. > > > thanks, > > Takashi > > --- > > diff -r 19b486f73bd8 pci/hda/patch_sigmatel.c > --- a/pci/hda/patch_sigmatel.c Fri Apr 25 14:25:04 2008 +0200 > +++ b/pci/hda/patch_sigmatel.c Tue Apr 29 20:43:43 2008 +0200 > @@ -4289,6 +4289,8 @@ > { .id = 0x83847635, .name = "STAC9250D", .patch = patch_stac925x > }, > { .id = 0x83847636, .name = "STAC9251", .patch = patch_stac925x }, > { .id = 0x83847637, .name = "STAC9250D", .patch = patch_stac925x }, > + { .id = 0x83847645, .name = "92HD206X", .patch = patch_stac927x }, > + { .id = 0x83847646, .name = "92HD206D", .patch = patch_stac927x }, > /* The following does not take into account .id=0x83847661 when > subsys = > * 104D0C00 which is STAC9225s. Because of this, some SZ Notebooks > are > * currently not fully supported. > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
