The dai configuration is always the same and should always configured
during the opening the stream.
Signed-off-by: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx>
---
sound/pci/hda/cs35l41_hda.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index d2addae8c085..f853530eb385 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -111,8 +111,6 @@ static const struct reg_sequence cs35l41_reset_to_safe[] = {
static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = {
.probe = cs35l41_reset_to_safe,
.num_probe = ARRAY_SIZE(cs35l41_reset_to_safe),
- .open = cs35l41_hda_config,
- .num_open = ARRAY_SIZE(cs35l41_hda_config),
.prepare = cs35l41_safe_to_active,
.num_prepare = ARRAY_SIZE(cs35l41_safe_to_active),
.cleanup = cs35l41_active_to_safe,
@@ -120,8 +118,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = {
};
static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = {
- .open = cs35l41_hda_config,
- .num_open = ARRAY_SIZE(cs35l41_hda_config),
.prepare = cs35l41_start_ext_vspk,
.num_prepare = ARRAY_SIZE(cs35l41_start_ext_vspk),
.cleanup = cs35l41_stop_ext_vspk,
@@ -129,8 +125,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = {
};
static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_int_bst = {
- .open = cs35l41_hda_config,
- .num_open = ARRAY_SIZE(cs35l41_hda_config),
.prepare = cs35l41_hda_start_bst,
.num_prepare = ARRAY_SIZE(cs35l41_hda_start_bst),
.cleanup = cs35l41_hda_stop_bst,
@@ -146,8 +140,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
switch (action) {
case HDA_GEN_PCM_ACT_OPEN:
- if (reg_seq->open)
- ret = regmap_multi_reg_write(reg, reg_seq->open, reg_seq->num_open);
+ ret = regmap_multi_reg_write(reg, cs35l41_hda_config,
+ ARRAY_SIZE(cs35l41_hda_config));
break;
case HDA_GEN_PCM_ACT_PREPARE:
if (reg_seq->prepare)
--
2.35.1
