[PATCH] ASoC: max98088: clean up some inconsistent indenting

[Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>]

Eliminate the follow smatch warning:

sound/soc/codecs/max98088.c:1112 max98088_dai_set_sysclk() warn:
inconsistent indenting.

Reported-by: Abaci Robot <abaci@xxxxxxxxxxxxxxxxx>
Signed-off-by: Jiapeng Chong <jiapeng.chong@xxxxxxxxxxxxxxxxx>
---
 sound/soc/codecs/max98088.c | 56 ++++++++++++++++++-------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index 429717d4ac5a..bc03ecd749f9 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -1102,44 +1102,44 @@ static int max98088_dai2_hw_params(struct snd_pcm_substream *substream,
 static int max98088_dai_set_sysclk(struct snd_soc_dai *dai,
                                   int clk_id, unsigned int freq, int dir)
 {
-       struct snd_soc_component *component = dai->component;
-       struct max98088_priv *max98088 = snd_soc_component_get_drvdata(component);
+	struct snd_soc_component *component = dai->component;
+	struct max98088_priv *max98088 = snd_soc_component_get_drvdata(component);
 
-       /* Requested clock frequency is already setup */
-       if (freq == max98088->sysclk)
-               return 0;
+	/* Requested clock frequency is already setup */
+	if (freq == max98088->sysclk)
+		return 0;
 
 	if (!IS_ERR(max98088->mclk)) {
 		freq = clk_round_rate(max98088->mclk, freq);
 		clk_set_rate(max98088->mclk, freq);
 	}
 
-       /* Setup clocks for slave mode, and using the PLL
-        * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
-        *         0x02 (when master clk is 20MHz to 30MHz)..
-        */
-       if ((freq >= 10000000) && (freq < 20000000)) {
-               snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x10);
-               max98088->mclk_prescaler = 1;
-       } else if ((freq >= 20000000) && (freq < 30000000)) {
-               snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x20);
-               max98088->mclk_prescaler = 2;
-       } else {
-               dev_err(component->dev, "Invalid master clock frequency\n");
-               return -EINVAL;
-       }
+	/* Setup clocks for slave mode, and using the PLL
+	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+	 *         0x02 (when master clk is 20MHz to 30MHz)..
+	 */
+	if ((freq >= 10000000) && (freq < 20000000)) {
+		snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x10);
+		max98088->mclk_prescaler = 1;
+	} else if ((freq >= 20000000) && (freq < 30000000)) {
+		snd_soc_component_write(component, M98088_REG_10_SYS_CLK, 0x20);
+		max98088->mclk_prescaler = 2;
+	} else {
+		dev_err(component->dev, "Invalid master clock frequency\n");
+		return -EINVAL;
+	}
 
-       if (snd_soc_component_read(component, M98088_REG_51_PWR_SYS)  & M98088_SHDNRUN) {
-               snd_soc_component_update_bits(component, M98088_REG_51_PWR_SYS,
-                       M98088_SHDNRUN, 0);
-               snd_soc_component_update_bits(component, M98088_REG_51_PWR_SYS,
-                       M98088_SHDNRUN, M98088_SHDNRUN);
-       }
+	if (snd_soc_component_read(component, M98088_REG_51_PWR_SYS)  & M98088_SHDNRUN) {
+		snd_soc_component_update_bits(component, M98088_REG_51_PWR_SYS,
+					      M98088_SHDNRUN, 0);
+		snd_soc_component_update_bits(component, M98088_REG_51_PWR_SYS,
+					      M98088_SHDNRUN, M98088_SHDNRUN);
+	}
 
-       dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
+	dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
 
-       max98088->sysclk = freq;
-       return 0;
+	max98088->sysclk = freq;
+	return 0;
 }
 
 static int max98088_dai1_set_fmt(struct snd_soc_dai *codec_dai,
-- 
2.20.1.7.g153144c