static int sof_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
@@ -145,13 +148,23 @@ static const struct snd_soc_dapm_route sof_es8316_audio_map[] = {
{"Speaker", NULL, "HPOL"},
{"Speaker", NULL, "HPOR"},
{"Speaker", NULL, "Speaker Power"},
+
+ {"Differential Mux", "lin1-rin1", "MIC1"},
+ {"Differential Mux", "lin2-rin2", "MIC2"},
+ {"Differential Mux", "lin1-rin1 with 20db Boost", "MIC1"},
+ {"Differential Mux", "lin2-rin2 with 20db Boost", "MIC2"},
this is surprising, shouldn't this be part of the codec driver?
The part that should be machine-specific is really how MIC1 or MIC2 are
connected (as done below), but the routes above seem machine-independent?
Or is this a work-around for a miss in the codec driver?
Confused...
};
-static const struct snd_soc_dapm_route sof_es8316_intmic_in1_map[] = {
+static const struct snd_soc_dapm_route sof_es8316_headset_mic2_map[] = {
{"MIC1", NULL, "Internal Mic"},
{"MIC2", NULL, "Headset Mic"},
};
+static const struct snd_soc_dapm_route sof_es8316_headset_mic1_map[] = {
+ {"MIC2", NULL, "Internal Mic"},
+ {"MIC1", NULL, "Headset Mic"},
+};
+
