Re: [PATCH v3 07/20] ASoC: fsl_micfil: drop error messages from failed register accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 5, 2022 at 4:00 PM Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:

> Failed register accesses are really not expected in memory mapped
> registers. When it fails then the register access itself is likely not
> the reason, so no need to have extra error messages for each regmap
> access. Just drop the error messages. This also fixes some places where
> a return value is concatenated using 'ret |=' and then returned as
> error value.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>

Acked-by: Shengjiu Wang <shengjiu.wang@xxxxxxxxx>

Best regards
Wang shengjiu

> ---
>  sound/soc/fsl/fsl_micfil.c | 53 ++++++++++----------------------------
>  1 file changed, 13 insertions(+), 40 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
> index 70185f75d8a04..b88ece31437ab 100644
> --- a/sound/soc/fsl/fsl_micfil.c
> +++ b/sound/soc/fsl/fsl_micfil.c
> @@ -170,17 +170,13 @@ static int fsl_micfil_reset(struct device *dev)
>
>         ret = regmap_clear_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                 MICFIL_CTRL1_MDIS);
> -       if (ret) {
> -               dev_err(dev, "failed to clear MDIS bit %d\n", ret);
> +       if (ret)
>                 return ret;
> -       }
>
>         ret = regmap_set_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                               MICFIL_CTRL1_SRES);
> -       if (ret) {
> -               dev_err(dev, "failed to reset MICFIL: %d\n", ret);
> +       if (ret)
>                 return ret;
> -       }
>
>         return 0;
>  }
> @@ -242,18 +238,14 @@ static int fsl_micfil_trigger(struct
> snd_pcm_substream *substream, int cmd,
>                 ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                 MICFIL_CTRL1_DISEL,
>                                 FIELD_PREP(MICFIL_CTRL1_DISEL,
> MICFIL_CTRL1_DISEL_DMA));
> -               if (ret) {
> -                       dev_err(dev, "failed to update DISEL bits\n");
> +               if (ret)
>                         return ret;
> -               }
>
>                 /* Enable the module */
>                 ret = regmap_set_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                       MICFIL_CTRL1_PDMIEN);
> -               if (ret) {
> -                       dev_err(dev, "failed to enable the module\n");
> +               if (ret)
>                         return ret;
> -               }
>
>                 break;
>         case SNDRV_PCM_TRIGGER_STOP:
> @@ -262,18 +254,14 @@ static int fsl_micfil_trigger(struct
> snd_pcm_substream *substream, int cmd,
>                 /* Disable the module */
>                 ret = regmap_clear_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                         MICFIL_CTRL1_PDMIEN);
> -               if (ret) {
> -                       dev_err(dev, "failed to enable the module\n");
> +               if (ret)
>                         return ret;
> -               }
>
>                 ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                 MICFIL_CTRL1_DISEL,
>                                 FIELD_PREP(MICFIL_CTRL1_DISEL,
> MICFIL_CTRL1_DISEL_DISABLE));
> -               if (ret) {
> -                       dev_err(dev, "failed to update DISEL bits\n");
> +               if (ret)
>                         return ret;
> -               }
>                 break;
>         default:
>                 return -EINVAL;
> @@ -293,24 +281,20 @@ static int fsl_set_clock_params(struct device *dev,
> unsigned int rate)
>                         clk_get_rate(micfil->mclk), rate);
>
>         /* set CICOSR */
> -       ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2,
> +       ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2,
>                                  MICFIL_CTRL2_CICOSR,
>                                  FIELD_PREP(MICFIL_CTRL2_CICOSR,
> MICFIL_CTRL2_CICOSR_DEFAULT));
>         if (ret)
> -               dev_err(dev, "failed to set CICOSR in reg 0x%X\n",
> -                       REG_MICFIL_CTRL2);
> +               return ret;
>
>         /* set CLK_DIV */
>         clk_div = get_clk_div(micfil, rate);
>         if (clk_div < 0)
>                 ret = -EINVAL;
>
> -       ret |= regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2,
> +       ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2,
>                                  MICFIL_CTRL2_CLKDIV,
>                                  FIELD_PREP(MICFIL_CTRL2_CLKDIV, clk_div));
> -       if (ret)
> -               dev_err(dev, "failed to set CLKDIV in reg 0x%X\n",
> -                       REG_MICFIL_CTRL2);
>
>         return ret;
>  }
> @@ -328,19 +312,14 @@ static int fsl_micfil_hw_params(struct
> snd_pcm_substream *substream,
>         /* 1. Disable the module */
>         ret = regmap_clear_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                  MICFIL_CTRL1_PDMIEN);
> -       if (ret) {
> -               dev_err(dev, "failed to disable the module\n");
> +       if (ret)
>                 return ret;
> -       }
>
>         /* enable channels */
>         ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL1,
>                                  0xFF, ((1 << channels) - 1));
> -       if (ret) {
> -               dev_err(dev, "failed to enable channels %d, reg 0x%X\n",
> ret,
> -                       REG_MICFIL_CTRL1);
> +       if (ret)
>                 return ret;
> -       }
>
>         ret = fsl_set_clock_params(dev, rate);
>         if (ret < 0) {
> @@ -362,7 +341,6 @@ static const struct snd_soc_dai_ops fsl_micfil_dai_ops
> = {
>  static int fsl_micfil_dai_probe(struct snd_soc_dai *cpu_dai)
>  {
>         struct fsl_micfil *micfil = dev_get_drvdata(cpu_dai->dev);
> -       struct device *dev = cpu_dai->dev;
>         int ret;
>         int i;
>
> @@ -370,11 +348,8 @@ static int fsl_micfil_dai_probe(struct snd_soc_dai
> *cpu_dai)
>         ret = regmap_update_bits(micfil->regmap, REG_MICFIL_CTRL2,
>                         MICFIL_CTRL2_QSEL,
>                         FIELD_PREP(MICFIL_CTRL2_QSEL,
> MICFIL_QSEL_MEDIUM_QUALITY));
> -       if (ret) {
> -               dev_err(dev, "failed to set quality mode bits, reg 0x%X\n",
> -                       REG_MICFIL_CTRL2);
> +       if (ret)
>                 return ret;
> -       }
>
>         /* set default gain to max_gain */
>         regmap_write(micfil->regmap, REG_MICFIL_OUT_CTRL, 0x77777777);
> @@ -388,10 +363,8 @@ static int fsl_micfil_dai_probe(struct snd_soc_dai
> *cpu_dai)
>         ret = regmap_update_bits(micfil->regmap, REG_MICFIL_FIFO_CTRL,
>                         MICFIL_FIFO_CTRL_FIFOWMK,
>                         FIELD_PREP(MICFIL_FIFO_CTRL_FIFOWMK,
> micfil->soc->fifo_depth - 1));
> -       if (ret) {
> -               dev_err(dev, "failed to set FIFOWMK\n");
> +       if (ret)
>                 return ret;
> -       }
>
>         return 0;
>  }
> --
> 2.30.2
>
>



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux